Jump to content
SAU Community

Recommended Posts

Yes I have been searching the forums but still after more opinions etc. My supporting mods will be powerfc, 700cc injectors, exhaust, pods,cam gears, walbro fuel pump.

Iam after about 290+ rwkw but the main thing is I want response NO LAG!!! ....The main question is how much more lag will I get with the -5 over the -7 , if its stuff all obviously its in my best interests to go the bigger turbo and add another 30-40rwkw.

2860r-7 = "N1" rated at 320hp

2860r-5 = "very close to 2530" rated at 360hp

Please list your opinions and if you are running these turbs your mods and when they come on boost etc.

Thanks,Ryan

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/
Share on other sites

To get the best out of the -5's you need Poncams...

This with comp. and tune for street will give you great responce.

You have not done a search....this topic has been discussed 1 billion times..LOL

Don't know what state you are in but if your in Melbourne..I could show you what the package can do...

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/#findComment-3156153
Share on other sites

You dont "need" poncams for the -5's at all. The top 5 Circuit cars here in Vic (that use -5) dont have poncams, and are leagues ahead of everyone else.

For 290-320rwkw, the -7 is what you want. The -5 (2530 style) are too big for that goal.

Simple as that really.

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/#findComment-3156216
Share on other sites

I don't see even why you posted this question?

It isn't complicated at all. -7's for mor response (less lag) and -5's for more power (but more lag).

But you seem to already know this.....

Either way your 290rwkw's will be achieved no problems. But you will feel the difference in lag between the 2 set-ups. But you will also feel the difference in power.

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/#findComment-3156422
Share on other sites

You dont "need" poncams for the -5's at all. The top 5 Circuit cars here in Vic (that use -5) dont have poncams, and are leagues ahead of everyone else.

For 290-320rwkw, the -7 is what you want. The -5 (2530 style) are too big for that goal.

Simple as that really.

Circuit...correct Ash..not street...who is goint to stay 6 to 8K Rpm on the road..LOL

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/#findComment-3156568
Share on other sites

excellent, looking forward the results

Same here - look forward to hearing results. I have a 26/30 running -5's as well. But mine is still a few weeks away before the key gets turned. Fngers crossed its gonna be gooooood.

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/#findComment-3156893
Share on other sites

I think it was WilliamsF1 here that turned his RB26 road engine into a torque mountain with the -7 type turbos which from memory are similar/same as RB26 specific GT-SS turbos . He did a lot of other things as well and I think the result made his RB26 feel more like people today expect a production engine to feel - sort of 2500-3000 and hang on .

I've never driven or even been in a GTR but everyone says that they're just a car until 4000 odd and then things really happen .

If I ever inherited a GTR its what I reckon I'd use . Makes the V8's look even sicker I suppose when the legend starts to haul nearly 1000 revs sooner than they usually do .

Cheers .

Link to comment
https://www.sau.com.au/forums/topic/171041-2860r-5-or-7/#findComment-3157854
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...