Jump to content
SAU Community

Recommended Posts

Have an R32 with full 3" exhaust, FMIC, intake mods & pod filter, BOV, boost tee etc. My trouble is where to go now. I am looking at fitting a fuel pump & FPR but am stuck on choice of turbo & tuning. For the turbo I am thinking of either a Trust TD05/06 or R33 GCG hi-flow. As for tuning does anyone know how much difference a Dr Drift remap would make compared to a SAFC or similar? I am aiming for roughly 200rwkw's. Also would injectors be necessary at this stage? A lot of 32's seem to be making 200+ on stockers

Link to comment
https://www.sau.com.au/forums/topic/171087-want-advice-please/
Share on other sites

Your next mod should be a fuel pump. R32's are about 18 years old now and if you're boosting your car, you don't want to run the risk of your engine leaning out (fuel pump failing). If you're aiming for 200rwkw+, you'll need to upgrade your injectors. You don't want to be running your injectors at its max. You could just purchase second hand GTR injectors. They're 440cc and you can push a maximum of about 300rwkw out of them which is more than enough. They're cheap too.

Hope that helps.

Cheers,

Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...