Jump to content
SAU Community

Recommended Posts

Hi, ive got a set of r33/r34 gtr S-tune coilover suspension, as new.Remote resevoir, very high quality.

Pickup from Sydney, or will post at buyers expense, will post up pics 2morrow.

PS the missus says they're awesome

Cost $1670+post from nengun, sell for $1050

Now also have an r32 GTR bootlid in gunmetal with spoiler, immaculate, spoiler in very good condition

$300

Edited by Adriano
I believe he was asking if the were S-Tune HA as in Height Adjustable

Nah was asking if they were the H's as the ones pictured above are just the S-tune suspension which are just a strut and spring and only worth about 1500 to begin with, where as the H is the coilover type which is worth a bit more....so wrong picture above I thinks....

Thats a pic of them, checked part number with nengun, and it comes up as the S tune H suspension. The S-tune HA looks the same again, the only difference that i can find is that they are to suit an r32 gtr, wheras the H type suits an r33/34. Ill post up the part numbers tomorrow.

Edited by Adriano

H and HA versions are height adjustable, the pics you have put up hav a fixed lower spring seat, ie not adjustable for height. They are adjustable for damping though

S-Tune http://www.nengun.com/nismo/s-tune-suspension-kit

S-Tune H http://www.nengun.com/nismo/s-tune-h-suspension Darker grey and height adj rings

Thank you for that, i wish nengun had better pics, and the H/HA's arent listed as having height adjustable, so i guess i will drop the price. Nengun sell them for $1670 + post, ill sell for $1200

If someone is looking for coilovers that aren't bone jarring these would be a good choice

http://translate.google.com/translate?u=ht...Flanguage_tools

Normal form attenuation power 5 step adjustment system (Fr and Rr) only front reservoir tank attaching height change generation: FR-30mm RR-20mm spring rate: FR6.0 RR6.7 (kgf/mm)

These spring rates are much softer than many of the coilovers out there but stiffer than stock by a margin. Also, if they came from nismo you can expect they are a good tuned match for the car.

Do you know how many K these have on them?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...