Jump to content
SAU Community

Recommended Posts

does your current afm have a pink sticker on it or is it an orange one?

have a look at this thread...helped me alot. it has pics in latter pages of a dodgy and good z32 and is good to identify a z32 in general.

http://www.skylinesaustralia.com/forums/in...t=0&start=0

does your car have aftermarket ecu such as powerfc as stock 33 ecu cant run a z32

does your current afm have a pink sticker on it or is it an orange one?

have a look at this thread...helped me alot. it has pics in latter pages of a dodgy and good z32 and is good to identify a z32 in general.

http://www.skylinesaustralia.com/forums/in...t=0&start=0

does your car have aftermarket ecu such as powerfc as stock 33 ecu cant run a z32

yeah power fc... the sticker is green... there are some part no's but still not sure trying to check part nos???

i get lost with part numbers as well but as lineskee 33 said series 1 afm stickers are green so this gives it away but under your profile info it says your car is series 2 33 so kinda contradicts and gets me lost lol

i get lost with part numbers as well but as lineskee 33 said series 1 afm stickers are green so this gives it away but under your profile info it says your car is series 2 33 so kinda contradicts and gets me lost lol

what a spinout... yeah thats strange cause it is definatly ser 2 96 r33. although the previous owner did some crazy things so i guess it doesnt supprise me too much. eg of JUST 1 of the things was bending the rod that goes to the actuator to get more boost(ouch)it has taken over a year to "demodd", fix and upgrade. im getting there now...

here is a even bigger spinout my mate came over to help me on this he rekons its a z32 so once again inspecting the sticker he rubbed his thumb to read and it slid off to reveal an orange one.Why the #@$%! would someone do this any ideas.?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...