Jump to content
SAU Community

Recommended Posts

i am selling the wrx and most likely will be thinking of getting a skyline. i like to do some research in the prior months to getting a new car though.

what i want basically.

good paint preferred with a kit.

racing looks, no bling.

low km or replaced engine.

i would like a gtr but from what ive read the insurance for under 25's is around $2500 plus????

so i have no problems with a modified gtst.

i prefer the 32's but would consider a 33 if it was perfect.

will spend around 17k but most likely no more.

inform me, can i get a good 32 with a rb26 imnplanted for a decent price of under 15k?

if not what kind of power could i expect out of the gtst 32 engine?

is importing the way to go? especially if you have a family friend owning a import company?

i only ask because i recently drove a friends 34 4 door with a power fc on 12psi i believe and to be honest i was not impressed with the power, in relation to my wrx ( fairly stock, injectors, tbexhaust, custom airbox, 16psi).

thanks in advance! feel free to point me to some cars for sale on various forums etc aslo...

the rb20det in the 32gts-t really lacks torque. and off the line compared to ur wrx its gona feel hell slow.

a 32 with an rb25 is the way to go, but if u havnt done it urself u never know if the previous owner has done a shitty instal job. plus more things will prolly go wrong with the car since its got a complety diff engine in it! so more $$$ fixin lil' shit things

a lightly modified 32gts-t is fun to drive and will still feel fast...but like i said, compared to a wrx off the line...ur gona be disapointed. ive found my 32 to be quiker top end than a wrx tho...

if i was u, id buy a lightly modded 32 for 11-12k...then add some good power mods to put u in ur seat...:blush:

inform me, can i get a good 32 with a rb26 imnplanted for a decent price of under 15k?

Put simply, NO. That is not a common conversion and if someone has done it there would have been a lot of cash spent, they are expensive engines if in good condition!

An r32 gts-t can still be modded to get good power. 160rwkw is relatively easy with ecu, exhaust and some boost.

If thats not enough then the next step up without spending a whole lot would be bolting on an r33 turbo (get it highflowed) boost it and get a front mount to go with it, and maybe GTR injectors or aftermarket ones, and an aftermarket fuel pump. You would have some decent performance out of that

for a lightly modded skyline what would i expect for 12k. tbe, bigger turbo? maybe piggyback ecu? i have been looking around on the net but from reading wrx forums for the past 2 years i have learnt alot and could tell you anything but i need to get in the know with the nissans.

what in terms of overall performance and handling would be the better of the two. like i said i like the look of 32's better but in the end i want a total driving package not just looks.

thanks!

Edited by danrs

i pikd up my 32 for $12.700 a year ago...it had a remapped ecu, bleed valve, boost guage, nismo exhaust from cat bak and apexi suspension. imaculate paint and interior, 108,000ks...type M kit and GTR front bar.

32atmordy.jpg

EDIT: as for suspension...i have adjustable apexi shoks and springs, adjustable caster rods and a gtr strut brace, and it has great handling. chuk in a set of Tein coilovers/sturt brace and ull be all good :blush:

Edited by 32line

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...