Jump to content
SAU Community

Gtr Power Parts For Sale (tomei Crank,hks Gt-ss Twin, Trust Fuel Rail)

AtomicBomberMan
 Share

Recommended Posts

AtomicBomberMan Experienced

AtomicBomberMan

Posted
Posted (edited)

Hi all, ive finally decided to part with my baby or at least sell off all the parts for the "plan" to have a tuff gtr. over the years i have quite a bit collected so here goes. please do not pm me as i do not come online often. if you wish to contact me please email me at [email protected]. Please do not whinge on this thread about Joe Bloggs down the road is selling it cheaper. Should you wish to contact me please call on 0417755890 after 6pm. thanks

USED TOMEI FORGED CRANK, FULL COUNTERWEIGHT $3800

USED TOMEI 87MM FORGED PISTONS WITH COOLING CHANNEL NO RINGS $1550

USED HKS GT-SS TWIN TURBO KIT FOR RB26. EXCELLENT CONDITION. NO SHAFT PLAY WHATSOEVER. LIKE NEW WITH HKS STRENGTHENED ACTUATORS. DONE 3XXXKMS $2450

NEW TRUST GREDDY FUEL RAIL 11MM INCLUDES LITTLE BITS AND PIECES, $300

NEW REINIK (NOW KNOWN AS REIMAX) GROUP A OIL PUMP. THIS IS THE PUMP USED ON THE GROUP A GTR'S IN JAPAN. REINIK ARE RESPONSIBLE FOR THE 2.8L IN THE 400R $1100

USED NISMO WHITE CLUSTER SET INCLUDED ARE SPEEDO 320KM, TACHO 11000RPM, TORQUE, FUEL, WATER TEMP, OIL PRESSURE $900

USED ARC TWIN ENTRY INTERCOOLER, APPROX 70-80MM THICK $350

USED ARC REAR STABILIZER BAR 30MM $320

NEW WIDE FENDERS FOR BNR32 FRONT 30MM WIDER ON EACH SIDE. MADE IN JAPAN. STRAIGHT BOLT ON. MEETS UP WITH STANDARD BUMPER. UNPAINTED. $900

NEW STEP 3 22MM PIN H BEAM CONRODS, STEP 3 APEXI VMAX 22MM PIN 86.1MM PISTONS WITH RINGS AND PINS & APEXI VMAX CAMS IN/EX 260 11.2MM LIFT, APEXI VMAX LIFTERS $4500 THESE HAVE BEEN SOLD

USED TRUST OIL SUMP EXTENSION. WELDING ALREADY DONE. DOES NOT INCLUDE ACTUAL DIFF. $700

Im pretty sure i have other parts too, but i havent finished clearing out the garage. I'll post them as i find them.

post-1554-1181248237_thumb.jpg

post-1554-1181248387_thumb.jpg

post-1554-1181248450_thumb.jpg

post-1554-1181248842_thumb.jpg

post-1554-1181248901_thumb.jpg

post-1554-1181248980_thumb.jpg

post-1554-1181249101_thumb.jpg

post-1554-1181249310_thumb.jpg

post-1554-1187140090_thumb.jpg

post-1554-1187140117_thumb.jpg

post-1554-1187140146_thumb.jpg

post-1554-1187140202_thumb.jpg

Edited by AtomicBomberMan
dazmo Proficient

dazmo

Posted
Posted

They are some good prices for some serious gear some one that wants a tough GTR should snap some of this stuff up.Good luck with the sale mate.

AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted
Will you sepeate any of the Apexi parts?

hi, which particular parts are you interested in? please sms or call me 0417755890

AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted

wht11 i am happy to separate. please check your pm. if youre interested, please call on 0417755890

cheers

AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted

for those that have contacted me. i will be in cairns until wednesday. any equiries by phone or sms only 0417755890.

INTERCOOLER SOLD

AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted
can you pm me the specs on the apexi turbo's

turbos are rated to 340ps each. bolt straight on to standard manifolds. includes all stainless earls lines and fittings for installation. kit is brand new. gtr's are running 10's with these turbos.

BOOSTD Mentor

BOOSTD

Posted
Posted
turbos are rated to 340ps each. bolt straight on to standard manifolds. includes all stainless earls lines and fittings for installation. kit is brand new. gtr's are running 10's with these turbos.

What size is the compressor and turbine wheel? (even if u can just measure the bits u can see) A/R's? Let me know and I'll make a fair offer if they suit.

AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted
What size is the compressor and turbine wheel? (even if u can just measure the bits u can see) A/R's? Let me know and I'll make a fair offer if they suit.

sent you pm. please check. http://www.apexera.co.jp/carlife/pro_apexi...URBO_syogen.pdf

AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted
Where about in Brissi are you? Im keen on the arc cooler.

im located on the west side indooroopilly way. can meet up if needed.

cheers

  • 1 month later...
AtomicBomberMan Experienced

AtomicBomberMan

Posted
  • Author
Posted

gauges are sold

oil pump sold

crank and intercooler people are stuffin me around

parts can be found on ebay with rb26 or gtr as keyword

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...