Jump to content
SAU Community

Recommended Posts

Hi all, ive finally decided to part with my baby or at least sell off all the parts for the "plan" to have a tuff gtr. over the years i have quite a bit collected so here goes. please do not pm me as i do not come online often. if you wish to contact me please email me at [email protected]. Please do not whinge on this thread about Joe Bloggs down the road is selling it cheaper. Should you wish to contact me please call on 0417755890 after 6pm. thanks

USED TOMEI FORGED CRANK, FULL COUNTERWEIGHT $3800

USED TOMEI 87MM FORGED PISTONS WITH COOLING CHANNEL NO RINGS $1550

USED HKS GT-SS TWIN TURBO KIT FOR RB26. EXCELLENT CONDITION. NO SHAFT PLAY WHATSOEVER. LIKE NEW WITH HKS STRENGTHENED ACTUATORS. DONE 3XXXKMS $2450

NEW TRUST GREDDY FUEL RAIL 11MM INCLUDES LITTLE BITS AND PIECES, $300

NEW REINIK (NOW KNOWN AS REIMAX) GROUP A OIL PUMP. THIS IS THE PUMP USED ON THE GROUP A GTR'S IN JAPAN. REINIK ARE RESPONSIBLE FOR THE 2.8L IN THE 400R $1100

USED NISMO WHITE CLUSTER SET INCLUDED ARE SPEEDO 320KM, TACHO 11000RPM, TORQUE, FUEL, WATER TEMP, OIL PRESSURE $900

USED ARC TWIN ENTRY INTERCOOLER, APPROX 70-80MM THICK $350

USED ARC REAR STABILIZER BAR 30MM $320

NEW WIDE FENDERS FOR BNR32 FRONT 30MM WIDER ON EACH SIDE. MADE IN JAPAN. STRAIGHT BOLT ON. MEETS UP WITH STANDARD BUMPER. UNPAINTED. $900

NEW STEP 3 22MM PIN H BEAM CONRODS, STEP 3 APEXI VMAX 22MM PIN 86.1MM PISTONS WITH RINGS AND PINS & APEXI VMAX CAMS IN/EX 260 11.2MM LIFT, APEXI VMAX LIFTERS $4500 THESE HAVE BEEN SOLD

USED TRUST OIL SUMP EXTENSION. WELDING ALREADY DONE. DOES NOT INCLUDE ACTUAL DIFF. $700

Im pretty sure i have other parts too, but i havent finished clearing out the garage. I'll post them as i find them.

post-1554-1181248237_thumb.jpg

post-1554-1181248387_thumb.jpg

post-1554-1181248450_thumb.jpg

post-1554-1181248842_thumb.jpg

post-1554-1181248901_thumb.jpg

post-1554-1181248980_thumb.jpg

post-1554-1181249101_thumb.jpg

post-1554-1181249310_thumb.jpg

post-1554-1187140090_thumb.jpg

post-1554-1187140117_thumb.jpg

post-1554-1187140146_thumb.jpg

post-1554-1187140202_thumb.jpg

Edited by AtomicBomberMan

They are some good prices for some serious gear some one that wants a tough GTR should snap some of this stuff up.Good luck with the sale mate.

Will you sepeate any of the Apexi parts?

hi, which particular parts are you interested in? please sms or call me 0417755890

wht11 i am happy to separate. please check your pm. if youre interested, please call on 0417755890

cheers

for those that have contacted me. i will be in cairns until wednesday. any equiries by phone or sms only 0417755890.

INTERCOOLER SOLD

can you pm me the specs on the apexi turbo's

turbos are rated to 340ps each. bolt straight on to standard manifolds. includes all stainless earls lines and fittings for installation. kit is brand new. gtr's are running 10's with these turbos.

turbos are rated to 340ps each. bolt straight on to standard manifolds. includes all stainless earls lines and fittings for installation. kit is brand new. gtr's are running 10's with these turbos.

What size is the compressor and turbine wheel? (even if u can just measure the bits u can see) A/R's? Let me know and I'll make a fair offer if they suit.

What size is the compressor and turbine wheel? (even if u can just measure the bits u can see) A/R's? Let me know and I'll make a fair offer if they suit.

sent you pm. please check. http://www.apexera.co.jp/carlife/pro_apexi...URBO_syogen.pdf

Where about in Brissi are you? Im keen on the arc cooler.

im located on the west side indooroopilly way. can meet up if needed.

cheers

  • 1 month later...

gauges are sold

oil pump sold

crank and intercooler people are stuffin me around

parts can be found on ebay with rb26 or gtr as keyword

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...