Jump to content
SAU Community

Recommended Posts

I did a search and couldn't really find what I am after.

When I start my car, there is a little puff of white smoke, and that's it. None when i'm driving or boosting, just on start up.

What would be causings this?

Also after that my exhaust has quiet a strong smell, it's had to tell what the smell is of - similar to burnt fuel, but this is constant.

I also had the car dynoed (not a tune or check, was just an open day dyno runs) and they said the car is runnin a bit lean.

What would this be from and how can it be fixed.

My Car is a 32 with a 26 conversion and remapped ecu.

white white smoke, oil, damaged turbo seal.

White steam smoke, blown head gasket due to running lean.

Possibly your injecotors are cloges, pump or fuel filter is on the way out

To test for head gasket, take it to a mechanic and do a gas analizer, this will tell you if there are any hudrocarbons in the radiator water.

To test for head gasket, take it to a mechanic and do a gas analizer, this will tell you if there are any hudrocarbons in the radiator water.

With the radiator, I am getting a new thermostat put in and the radiator fulshed, cleaned and new coolant put in.

Is there another way to check if the head gasket is or on its way to being screwed?

If the head gasket is screwed, what's a rough estimate to get it fixed?

Edited by URAS_33

when u start ur car is it early in the morning when its cold?? probs just the hot air hitting the cold air and creating the normal mist which all cars get when its freezing. Its funny how many people i know who got all scared that theyre car is puffing out white smoke when this is all that it is. just a lil food for thought. It may not be all bad. with the running lean probs ur fuel pump.

I did a search and couldn't really find what I am after.

When I start my car, there is a little puff of white smoke, and that's it. None when i'm driving or boosting, just on start up.

What would be causings this?

Also after that my exhaust has quiet a strong smell, it's had to tell what the smell is of - similar to burnt fuel, but this is constant.

I also had the car dynoed (not a tune or check, was just an open day dyno runs) and they said the car is runnin a bit lean.

What would this be from and how can it be fixed.

My Car is a 32 with a 26 conversion and remapped ecu.

A small amount of white smoke usually means the oil you're using is too light on start up.

Fuel smells nothing to worry about, probably just the seal to the fuel tank/pump, as it's known to perish on the r32 over time.

As for running lean that's bad... if you have a pfc or other ecu what knock reading are getting?

As for running lean that's bad... if you have a pfc or other ecu what knock reading are getting?

It just has the standard computer which has been remaped.

PFC is definatly the first on the cards and a good tune.

Yeah white smoke / steam is really faint and does disapate straigh away. I guess coz I'm new to the RB26 (only had a 25 before hand), I'm sketchin about every little thing thats goin on.

I also get white smoke on cold morning starts but i hope its due to LatinR33's explanation :P

Will have a proper look tomorrow morning if it lingers around or just disappears

Read from a site.

could be antifreeze when it is being burned it has a sweet type of smell and tends to dissipate in the air rather quickly
Sometimes when the head gasket goes it will produce a passage for the antifreeze to pass from the capillaries into the combustion chamber.
Answer 2

If the exhaust billows white smoke for a few seconds when first starting the engine after it has been sitting for a while, such as overnight, and then runs normally, it could mean that the rubber valve stem seals have perished - especially if the vehicle is a few years old and has done over 60/70,000 miles.

Another clue is: does the exhaust smoke smell like fresh, rather than burnt oil.

On cold engine starts, especially, the ECU will momentarily run a rich mixture to get ignition going, then thin it back to normal once the O2 sensor can get an accurate reading. The puff of 'smoke' probably has a sweet smell and would contain a small amount of poorly combusted fuel, some uncatalyzed exhaust, and likely a bit of condensation.
Remember it this way--if the white smoke doesn't go away, THEN you have a problem. If it disappears after a few minutes, it's just water vapor. Part of the chemical equation for the combustion of gasoline includes H20.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
    • I haven’t yet cut the chassis, maybe I switch to a reverse flow. I’ve got the Intercooler mounted as I already had it but not cut yet. Might have to speak to an engineer 
    • Yes that’s another issue, I always have a front mount, plus will be turbo plus intake will big hasstle. I’ve been told if it looks stock they’re fine with it by a couple others who have done it ahahaha.    I know @Kinkstaah said the stock gtt airbox is limiting but I might just have to do that to avoid a defect so it atleast looks legit. Or an enclosed pod so it’s hidden away and feed air from the snorkel and below Intercooler holes like kinstaah mentioned. Hmm what to do 
×
×
  • Create New...