Jump to content
SAU Community

Recommended Posts

Most tyre places will be able to do a decent wheel balance but for a proper wheel allignment, I use :

Accurate Suspension Services

2/ 9 Timms Crt Woodridge 4114

(07) 3808 2878

Ditto. Ken is pretty good.

depends on what equipment they have.. i personally prefer using the laser machines.. more acurate.. ive done a few W/As

i could only recommend SS toyota at the gabba as they brought a new W/a machine which does everything.. and its laser yo none of this 18th century shit.. at like $40-$60 for u guys should be good..

My last allignment was conducted by "Tyrepower" at Geebung...

Usually I would use Fulcrum however at the time they were busy and could not service me that week...

So I tryed Tyrepower and they were pretty good, I had un-even tyre wear before visiting them and they fixed up that issue :)

Anyone with a decent modern wheel alingment machine can do a good job. Its really only when you want track proven race setups that you need to get specific with wheel aligners and machine operators...

i need a W/A time to call up my old work ill let u knw the prices.. cause seriously they have a state of the art machine ther. the ramp dnt like low cars thats the only problem... yay for 8cm off the ground front bar lol

lol at 18th century shit....

i believe now they have camera alignment machines that are all computerized, i guess you can call the laser soooo last century.

laser is camera my friend.. uses 36 dot points on each wheel and on a 45 degree angle.. and it is very accurate.

Hmm,

I may live in humble little gympie town, but I can assure you that the laser aligners are not all they are cracked up to be!

How do I kow? Well, My father in law has been running his own Suspension shop for just over 20years! He has been in the suspension game for just on 30 years! He has now handed the shop over to his oldest son. Both of them have raced cars. Lots of them! lots of races, lots of wins! The cars were not powerful, just a very well thought out suspension and wheel alignment!

Both of them do not like or use the laser! They both prefer the old projector style unit(which is VERY old!). If there is a car in town that has been in an accident, or the other guys cant get right, they send it to my inlaws. Now my father in law is a quiet sort of a guy, but he will gladly give you a serve if you think the laser is best!

the second issue that usually arises with alignments is accidents! some shops don't check that the car is square. These sorts of shops will generally only give the car (your car) what ever specs the book says. They don't take into account your driving style, the rim offset, tyre pressures and other subtle things that upset the vehilce, which in turn upset the tyre wear. bent arms or worn bushes.. you get my point. EVERY car unique.

Now if you have coil overs.. Man don't get me started!

Don't waste your time looking for lasers, look for a shop that goes racing!

They should be way ahead of the rest!

If they don't sponsor cars that race, and or have their own race cars, walk away!

Good Old Knowledge with old tools will always beat crap knowledge with technolgy

Don't waste your time looking for lasers, look for a shop that goes racing!

They should be way ahead of the rest!

If they don't sponsor cars that race, and or have their own race cars, walk away!

Good Old Knowledge with old tools will always beat crap knowledge with technolgy

Anyone with a decent modern wheel alingment machine can do a good job. Its really only when you want track proven race setups that you need to get specific with wheel aligners and machine operators...

I believe "ditto" is the correct word to use >_<

Most tyre places will be able to do a decent wheel balance but for a proper wheel allignment, I use :

Accurate Suspension Services

2/ 9 Timms Crt Woodridge 4114

(07) 3808 2878

Got my R32 booked in there for this week and I will let you know how it goes. Total price is either $102 or $105 cant remember. It was either $62 or $65 for the wheel allignment and $10 per wheel for a balance.

Alright just got the car back from getting the wheel allignment and balance done. Ken was great guy he even pointed out some problems with the car for me to look into. All up it was $105 for the wheel allignment and all 4 wheels balanced. I will be using him in the future and can't say enough good things about him.

  • 2 years later...
hi there,

just wonder where is a good place for wheel alignment and wheel balance in brissy?

thx

As per above, any good workshop or reputable place can do 4-wheel alignment for skyline with HICAS in brisbane?

i searched through the forum and all recommendations were back dated a few years ago in 2004 to 2007.

Any latest update or new recommendation?

:P

Another vote for Ken @ Accurate Suspension Services

Or Jax Quickfit at Bowen Hills (I can't vouch for any of the other ones). Just make sure to ask for someone who knows what they are doing (theres a couple of guys there that a real wizards), or it may get done by an apprentice.

Or Roy @ Bosman Wholesale Tyres (Archerfield)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...