Jump to content
SAU Community

Recommended Posts

Yay I have found access to Nissan Fast. I have been using it for personal use to locate part numbers the R32 GTR manual does have.

The reason I use it personally was because I was getting tired of ringing up Nissan to get someone with a crappy attitude and wasting 30mins trying to explain what I am after, with respect they are very helpful.

So if you want to save time on the phone trying to describe the part your after to the Nissan Dealers send me a PM on what you need and I'll do my best to find your OEM part number you can take to Nissan. **I take no responsibility on the integrity of the part number that is given**

I know there is something like this in the forums but i couldnt find it.

---MODS--- if I am crossing some boundaries here, just delete this topic.

As a minimum i need:

Model (ie. R32)

AND/OR

VIN-code or Chassis Code (I havent used this yet, it is beneficial for coloured parts, ie panels)

Name of item wanted

General description

-Have Fun

Link to comment
https://www.sau.com.au/forums/topic/172841-w00t/
Share on other sites

Great guys, thanks for your replys.

If you guys jump on my signature theres a link to the topic in the DIY.

I have only started a little bit but it will get big, one day, with everyone's help.

This time I hope it stays and becomes a very valuable tool for SAU members.

Yes the FAST is a awesome tool, im bored of it already haha.

Mark - Yes I have details of s13's which I can post up as well on my little topic.

Link to comment
https://www.sau.com.au/forums/topic/172841-w00t/#findComment-3182209
Share on other sites

hI GUYS,

Just installed it and after putting my VIN and Model No in, im getting this

VIN NO. NOT FOUND.

Car is a 1992 r32 gtst, and i have these CDS a1, a2, a3, b1, b2, gl, gr.

If that makes any sence.

I hope my car isnt using a fake VIN....

:(

Also im running v3.50 what version are you guys running? This seems very old, like it was suitable for windows 98 and lower.

Edited by Antone
Link to comment
https://www.sau.com.au/forums/topic/172841-w00t/#findComment-3182242
Share on other sites

hI GUYS,

Just installed it and after putting my VIN and Model No in, im getting this

VIN NO. NOT FOUND.

Car is a 1992 r32 gtst, and i have these CDS a1, a2, a3, b1, b2, gl, gr.

If that makes any sence.

I hope my car isnt using a fake VIN....

:(

Also im running v3.50 what version are you guys running? This seems very old, like it was suitable for windows 98 and lower.

assuming you have installed yours correctly, all u need is the details on blue plate of your car. Chassis No and Model Number

eg. for r33 gtr

Chassis No. BCNR33 then next box 023211

Model GGJPRWFR33ZDAAA--A

Link to comment
https://www.sau.com.au/forums/topic/172841-w00t/#findComment-3182416
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...