Jump to content
SAU Community

Recommended Posts

Sorry Neil I don't understand what you mean.. are you asking what type of r32? R32 GTST rb20det 2 door coupe '92

yeah sorry bout that, it is what i meant. it the inner glass weather strip

, sits at top of the door fab.

Could I just remind people that need numbers that it would advantageous to supply the following: (after all u are getting this for free at the expense of someones time)

FOR REQUESTS: Please specify the following, the more the better and easier for me to get the right number for you.

Model: R32 R33 R34 S15 etc

Year: MOST IMPORTANT!

Colour: Colour if body part.

Model Number: Blue plate - Really handy if you get this

Chassis Number: Blue plate - Really handy if you get this

Edited by arbess

Hey, thanks for doing this guys.

Could you help me out with a part number(s) for the rear quarter window rubber seals for a 1993 R32 gtst? So im after the rubbers that go around the rear quarter windows.

VIN 6U9000HCR32292253

Model KRCR32RGFS3 FA

Chassis HCR32-292253

Thanks,

Shaun.

can you guys help.

Need the part number for the Rear Fog Light for the GTR 34.

Its on the rear bumper, Left side (white) is the reverse light..looking for the right side (Red) fog light.

Thanks heaps

Hey, thanks for doing this guys.

Could you help me out with a part number(s) for the rear quarter window rubber seals for a 1993 R32 gtst? So im after the rubbers that go around the rear quarter windows.

VIN 6U9000HCR32292253

Model KRCR32RGFS3 FA

Chassis HCR32-292253

Thanks,

Shaun.

bad news for u the rubbers are apart of the glass, so you can't get them as a seperate part. and in advance the part No. for the qtr glasses are as follows

83306-04U00 RH qtr glass

83307-04U00 LH qtr glass

bad news for u the rubbers are apart of the glass, so you can't get them as a seperate part. and in advance the part No. for the qtr glasses are as follows

83306-04U00 RH qtr glass

83307-04U00 LH qtr glass

ahh yes its true. not cheap either....

bad news for u the rubbers are apart of the glass, so you can't get them as a seperate part. and in advance the part No. for the qtr glasses are as follows

83306-04U00 RH qtr glass

83307-04U00 LH qtr glass

Dammit!!

Thanks anyway.

Shaun.

not sure if it has been mentioned yet but the part number for a genuine turbo to dump pipe gasket on an r32 gtr (should be same for newer gtr's but unable to confirm atm) is 14445-05U00.

hope that helps somebody out :-)

not sure if it has been mentioned yet but the part number for a genuine turbo to dump pipe gasket on an r32 gtr (should be same for newer gtr's but unable to confirm atm) is 14445-05U00.

hope that helps somebody out :-)

CONFIRMED!!!!

AND I HAVE FAST AGAIN!

From all the PM recently about me getting numbers, i thought it was a good idea to reinstall after i lost my copy.

and remember!!!!! in big bold fk off letters:

FOR REQUESTS: Please specify the following, the more the better and easier for to get the right number for you.

Model: R32 R33 R34 S15 etc

Year: MOST IMPORTANT!

Colour: Colour if body part.

Model Number: Blue plate - Really handy if you get this

Chassis Number: Blue plate - Really handy if you get this

lawl.

  • 3 weeks later...
I dont think they are the same as RB26. Here is what I have for you,

RB25DET 93- 96

- Belt Fan & Alternator AY140-40850-

- Belt Compressor AY140-40910-

- Belt Power Steering and Oil Pump AY140-30845-

also

- Belt Timing 13028-20P25-

- Filter Oil AY100-NS007-

Good Luck,

Added

HI, just got these belts from Nissan Australia and the part numbers are different to the ones above

Fan & Alternator 11720-42L02AU

Compressor 11720-77A01

Power Steering 11950-58S02

I'm just guessing they are the Australian part numbers but not 100% sure.

Can you confirm if they are still correct for the following car

R33 GTSt 95 model

TYPE CHASSIS NO: ECR33-051545

MODEL NO: GGKBRTFR33VDA--JD-

Also is the Thermostat Assy the correct part number as well 21200-42L06

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...