Jump to content
SAU Community

Recommended Posts

Hey guys. I have a hks mushroom pod and the filter foam need replacing desperately. Is it worth paying $50 for more foam or I can get apexi power intake pod for $85 new. I know the apexi is the dry type filter but ive heard nothing but good things about the hks pods. Whats best??

Link to comment
https://www.sau.com.au/forums/topic/173306-which-pod-filter/
Share on other sites

i use a k&n pod filter. no dramas so far. fantastic local stuff :P

get the cleaner kit for it and do it every 10,000k's

Yeah ive had k n N filters before too, they are good. Just thinking maybe the dry type shit now that everyone goes on about the oil killing afm's??

K&N Pod. They don't foul your afm with oil either. They only do if you get over enthusiastic when your re-oiling. Even then if you do over oil just spray electrical contact cleaner over the afm element after you've taken the car for a drive. (allows the larger portions of oil to be ingested, leaving the rest in the filter.)

i had a KN now a HKS mushy...

KN louder then HKS

HKS dry KN oiled

HKS fits into smaller places where KN cant (eg my engine bay)

KN much cheaper (can get them for under $50 at autobarn sales)

If i had to pick another besides these two, wouldnt mind checking out the Blitz pod...APEXI no way, some say its good some say its absolute crap...wouldnt want to spend $200 on something that MIGHT be good.

But yeh i cant decide between HKS or KN

Ive got an HKS mushroom on my car.... give it a clean every few months... sounds good, looks good, lots of flow...

borrowed an Apexi Power intake one and put it on the car.... it was so farken quiet that it felt like i was almost driving a non turbo! plus the car didnt feel as quick!

hks one back on the next day!

The stock air box with K&N panel filter sounds so much more classy and refined. You can also hear the turbo spool rather than the awful loud sucking noises you get with a pod

my thoughts exatly. nothing sweeter than the spool. even though im on a stock turbo

Ive got an HKS mushroom on my car.... give it a clean every few months... sounds good, looks good, lots of flow...

borrowed an Apexi Power intake one and put it on the car.... it was so farken quiet that it felt like i was almost driving a non turbo! plus the car didnt feel as quick!

hks one back on the next day!

Didnt feel as quick cause you couldnt hear the loud sound. from my experience the apexi is quite loud. Personally stock box with hi flow filter is good. no heatsoak and car sounds good enough. didnt by a turbo because of the sound it makes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...