Jump to content
SAU Community

Recommended Posts

So after unpacking the rest of my boxes since the move (only took me 12months :D ) i came across some stuff i wont be using.

Central 20 ECU with Dr Drift remap/s and Central 20 chip.

Dr Drift remap 1 = Speed/boost cut, bigger turbo, dump, FMIC, fuel pump.

Dr Drift remap 2 = Speed/boost cut, bigger turbo, dump, FMIC, fuel pump, Z32 & injectors.

Central 20 remap = same as remap 1 but also additional injectors.

ECU.jpg

$350 for the lot

APEXI AFC

Came in car when imported, never used.

AFC2.jpg

$80 SOLD

GReddy Rebic - injector controller

Was in good working order when car was imported, removed while tuning.

$100

OMORI mechanical gauges

White faced all in car when imported.

Oil pressure

Oil Temp

Exhaust Temp

Water Temp SOLD PENDING PAYMENT

as far as i can tell all fittings are still there but i never had them hooked up so i cant be 100% sure.

$150 each or will do package deal.

GReddy boost gauge - came in car in good condition with gauge holder

$140

R32 GTR injectors x6

never used, when purchased they were cleaned and tested and in good working order.

GTRinjectors.jpg

$350 SOLD

Z32 - 2nd hand but in good working order (NO PLUG)

$200 SOLD

Have more items will list later on and will add pics once camera is charged.

All prices are negotiable and located in Tasmania but willing to send at buyers expense.

Please reply, PM or bj_glover at hotmail.com

im keen on the gauges but ill have to wait till my new motor turns up to see what NEEDS to be spent

GTR injectors may be a gower to? ill see.

some piccies would be tops thoe?

Judging from the interest the gauges will be long gone and im hoping the injectors will be as well old boy :worship:

gtr injectors, i want em :) , does that ballast resistor thingy come with them?

The good Dr wants the the injectors dude so you will have to argue with him :wave:

Resistor doesn't come with them, im holding onto that for something else :domokun:

Hey mate,

Do you have an RB26DETT injector rail by chance? I need one ASAP.

Also needing R32 GTR throttle cable ASAP!

Let me know if you can help!!

Thanks

Nah sorry chief

can help there im afraid, have you looked in the classifieds section or posted in the WTB???

Have a chat to Heath at Eurotech as he has some stuff laying around and also try Scott at SOURCE AUTOMOTIVE :O

GMB

  • 2 weeks later...
  • 1 month later...
Which AFC Ben? Old 5 dial black one or single dial one? If its the 5 dial I could be interested.

What does the Greddy REBIC unit do?

Single dial cobber, from what i found there easier to set up cause there's less farking around with the other dials :thumbsup:

The REBIC unit is an injector controller.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...