Jump to content
SAU Community

Recommended Posts

I know the roll cage is probably the the single most expensive purchase to go racing, but after that it's all down hill....

Once the cage is in and you have the other safety items installed, you can go racing. To grater belief you don't need to have the car as fast as she can be or have new race rubber or the latest "go fast bits" ect..ect.. JUST GO RACING. Half the thrill is actually being out there and giving it a go. Learn the craft, become a better driver, have a s%#t load of fun and then... When time and budget permits, take the next step.

Life is too short! I have stuff all money to go racing, so does Briggsie, Perry, Maxfeild..... The list goes on. You simply don't need a V8 SUPERCAR budget to live the dream.

JUST DO IT! While you're still living and breathing.....

If only it was that simple though...

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 3 weeks later...
I hope to run my Gtst next year. it's only got a new front mount, greddy plenum, power fc, 3inch exhaust and a roll cage. should there be anything else i should put in?

You will need an approved harness, window net, extinguisher, battery isolator with remote pull wire so it can be operated from outside the car,

race suit, plus your car will need to log booked with cams, plus a few other things CAMS website has a detailed list of requirements for circuit racing. For a good look in you could have a go at regularity, usually run by the MGCC at Symmons and the requirements are only same as running a club day I believe.

(Rocket_Rosco @ 3 Jul 2007, 06:37 PM)]

I know the roll cage is probably the the single most expensive purchase to go racing, but after that it's all down hill....

Once the cage is in and you have the other safety items installed, you can go racing. To grater belief you don't need to have the car as fast as she can be or have new race rubber or the latest "go fast bits" ect..ect.. JUST GO RACING. Half the thrill is actually being out there and giving it a go. Learn the craft, become a better driver, have a s%#t load of fun and then... When time and budget permits, take the next step.

Life is too short! I have stuff all money to go racing, so does Briggsie, Perry, Maxfeild..... The list goes on. You simply don't need a V8 SUPERCAR budget to live the dream.

JUST DO IT! While you're still living and breathing.....

amen to that :sorcerer:

Well that means im only $14995 short :D

thats cheap, its cost me more than that for a dirty old pos hq, i wish i hadnt started hq, i would be in a skyline :rofl:

do you need a window net for TSS? I notice that not all of the cars had window nets last round.

Yeah you do a window net (only Historic Touring Cars are exempt, Targa class used to be but no longer), they cost a bit over 100 with quick release brackets if too lazy to make some up!

My cage for the RX7 will look like this. Allow $3500 + about $200 per bar extra. And thats the reduced price if you provide the car stripped and without glass fitted. Painting and padding is also extra.

post-5400-1185255618_thumb.jpg

Yeah you do a window net (only Historic Touring Cars are exempt, Targa class used to be but no longer), they cost a bit over 100 with quick release brackets if too lazy to make some up!

My cage for the RX7 will look like this. Allow $3500 + about $200 per bar extra. And thats the reduced price if you provide the car stripped and without glass fitted. Painting and padding is also extra.

post-5400-1185255618_thumb.jpg

Wheres the best place to get the net from stu?

Im not sure if any of you remember Leo's R33 GTR V-spec from up north, but the guy that built that is doing my cage. Stu, He's currenty putting the finishing touch's to his series 6 RX7 too.

Im not sure if any of you remember Leo's R33 GTR V-spec from up north, but the guy that built that is doing my cage. Stu, He's currenty putting the finishing touch's to his series 6 RX7 too.

Yeah I spoke to Spurry about mine, still debating if I want to drag it up and back on a trailer though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...