Jump to content
SAU Community

Recommended Posts

I know the roll cage is probably the the single most expensive purchase to go racing, but after that it's all down hill....

Once the cage is in and you have the other safety items installed, you can go racing. To grater belief you don't need to have the car as fast as she can be or have new race rubber or the latest "go fast bits" ect..ect.. JUST GO RACING. Half the thrill is actually being out there and giving it a go. Learn the craft, become a better driver, have a s%#t load of fun and then... When time and budget permits, take the next step.

Life is too short! I have stuff all money to go racing, so does Briggsie, Perry, Maxfeild..... The list goes on. You simply don't need a V8 SUPERCAR budget to live the dream.

JUST DO IT! While you're still living and breathing.....

If only it was that simple though...

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 3 weeks later...
I hope to run my Gtst next year. it's only got a new front mount, greddy plenum, power fc, 3inch exhaust and a roll cage. should there be anything else i should put in?

You will need an approved harness, window net, extinguisher, battery isolator with remote pull wire so it can be operated from outside the car,

race suit, plus your car will need to log booked with cams, plus a few other things CAMS website has a detailed list of requirements for circuit racing. For a good look in you could have a go at regularity, usually run by the MGCC at Symmons and the requirements are only same as running a club day I believe.

(Rocket_Rosco @ 3 Jul 2007, 06:37 PM)]

I know the roll cage is probably the the single most expensive purchase to go racing, but after that it's all down hill....

Once the cage is in and you have the other safety items installed, you can go racing. To grater belief you don't need to have the car as fast as she can be or have new race rubber or the latest "go fast bits" ect..ect.. JUST GO RACING. Half the thrill is actually being out there and giving it a go. Learn the craft, become a better driver, have a s%#t load of fun and then... When time and budget permits, take the next step.

Life is too short! I have stuff all money to go racing, so does Briggsie, Perry, Maxfeild..... The list goes on. You simply don't need a V8 SUPERCAR budget to live the dream.

JUST DO IT! While you're still living and breathing.....

amen to that :sorcerer:

Well that means im only $14995 short :D

thats cheap, its cost me more than that for a dirty old pos hq, i wish i hadnt started hq, i would be in a skyline :rofl:

do you need a window net for TSS? I notice that not all of the cars had window nets last round.

Yeah you do a window net (only Historic Touring Cars are exempt, Targa class used to be but no longer), they cost a bit over 100 with quick release brackets if too lazy to make some up!

My cage for the RX7 will look like this. Allow $3500 + about $200 per bar extra. And thats the reduced price if you provide the car stripped and without glass fitted. Painting and padding is also extra.

post-5400-1185255618_thumb.jpg

Yeah you do a window net (only Historic Touring Cars are exempt, Targa class used to be but no longer), they cost a bit over 100 with quick release brackets if too lazy to make some up!

My cage for the RX7 will look like this. Allow $3500 + about $200 per bar extra. And thats the reduced price if you provide the car stripped and without glass fitted. Painting and padding is also extra.

post-5400-1185255618_thumb.jpg

Wheres the best place to get the net from stu?

Im not sure if any of you remember Leo's R33 GTR V-spec from up north, but the guy that built that is doing my cage. Stu, He's currenty putting the finishing touch's to his series 6 RX7 too.

Im not sure if any of you remember Leo's R33 GTR V-spec from up north, but the guy that built that is doing my cage. Stu, He's currenty putting the finishing touch's to his series 6 RX7 too.

Yeah I spoke to Spurry about mine, still debating if I want to drag it up and back on a trailer though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...