Jump to content
SAU Community

Recommended Posts

VIC has excellent contacts and generally gets things at a reasonable rate if that helps.

How many are you ordering?

Just contact BEC, she knows the drill for the SAU-Vic supplier :)

Min order is 20!

I'll talk to Bec see what she says..

  • Replies 951
  • Created
  • Last Reply

Top Posters In This Topic

Ok I've got a costing for the shit's they work out to be about $43 each.. The most expensive part of the cost is the set up fee's for the front side of the shirts..

I'm going to see what I can do to reduce these costs..

Ol mate Benny put the cost of shirts up a bit!

Anyone who is heading down a day earlier (Thursday) know the full details about the Winton track day on the Friday? Ie... cost to get on, pay on the day? need CAM L2S? full circuit or 2km curcuit??

Cant find any info.... will go back to looking now....

Anyone who is heading down a day earlier (Thursday) know the full details about the Winton track day on the Friday? Ie... cost to get on, pay on the day? need CAM L2S? full circuit or 2km curcuit??

Cant find any info.... will go back to looking now....

1. do you need a cams licence for the track or any

You will need either a CAMS or AASA license yes.

2. how much is this for the day

It's $100

3. is there anywhere you recommend to stay on the thursday night

My advice to the others is just to stay at the place we stay at Shepparton as it is only 30-40mins down the road

4. is it normal long shirt/jumper, pants, ankle to toe shoes and helmet

yep thats fine

got told this hope it helps

that site doesn't really tell us what we're after

anyhow.. i just called them... Friday 24th August is the National Circuit. It'll be $120 and you'll need all the usual stuff (considering you need fire extinguishers etc for deca i didn't ask about this)... Gates open at 8am, racing starts about 10am and goes until 4:30. 30min sessions.




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...