Jump to content
SAU Community

Recommended Posts

Yes, you guys heard correctly. I know that everyone says r33 ecus are impossible to remap, but I have two of them right here.

I have for sale 2 remapped r33 ecus. As i'm sure you're all aware, when you up the boost on the stock ecu, timing is retarded severly, and the mixtures go really rich.

Both of the remapped ecus eliminate rich and retard. Ignition timing is advanced quite significantly throughout the rev range too, so they should make more power, more torque, be more responsive and have faster turbo spool.

I bought both of these ecus off the forums here, but I have had a change of plan for my car. They are both from famous japanese tuning companies. The ecus suit r33 rb25, with stock afm and stock injectors. Works to optimise the stock turbo, or aftermarket turbo (up to the power level that the stock injectors and afm support). Runs perfectly on 98 octane petrol (yes, they have been tested with a wideband air fuel ratio meter).

Price: 500 each TO YOUR DOOR via express post .

Contact: PM or call me on 0403 211 482 (Chris)

Edit: forgot to say, speed limiter has also been removed (of course :thumbsup: )

Edited by MANWHORE
Link to comment
https://www.sau.com.au/forums/topic/174728-r33-remapped-ecus/
Share on other sites

lol... turbo tune on south road do a complete standard r33 ecu remap for $500. Everything you can tune a powerfc to do, they can do to the standard ecu. That price includes everything from A-Z in tuning a skyline.

Hey dude.. where are you located?

Also where did you get these from?

Am i able to test it before i purchase it?

Is it suitable for stock side mount? and then later suited for a fmic if i ever get one? or even a 34 side mount?

Currently just got full exhuast, pod, and little tad more boost..

Got any graph figures?

This ecu suited for a Series 2 manual?

If i do get this ecu, can a tuner be able to check it on dyno? and maybe even tune it a bit?

Or is the ROM untune able?

Got any pics?

Also if i sell this ecu, can i just put standard ecu back in without any problems?

cheers

edit: also how lean and rich is this ecu? if that makes sense?

Edited by siddr20

Hi sid

I'll try and answer all of your questions.

I'm located in st ives

The ecus are from japanese tuning companies (but works with 98 octane petrol fine)

of course you're able to test it first. I would prefer that you did - that way, we're all happy. I'm not here to sell stuff that isn't suited to people's car.

It most definitely is suited to the stock, fmic or 34 sidemount. Refer to my post above. Once you increase airflow to a certain level, car will go rich and retard. the map on my ecu doesn't do this. Even with the stock sidemount, it'll make more power, torque etc, because it has more timing everywhere

dyno graph is useless, because power is dependant on mods. I don't believe in dynos. I don't care about power figures. I much rather road testing with a wideband o2 sensor. Knock can be monitored by monitoring knock sensor voltage on a laptop

sII manual - haven't tested it on an sII manual. Worked perfectly on an sI manual.

You're most welcome to test it on a dyno. The ecu has a chip socket in it now, so if a tuner knows how to remap it again, sure, he can burn a chip and put it in.

You sure can - unplug it and plug the other one back in

yep. one was sold to me.

it seems like its normal from around idle - 3k rpm then its all smiles from then on. i felt a difference straight away.

and the fact that it can be re-tuned via a new chip (i didnt know that) is even better.

thanks mate. will keep you posted on my 1/4 times.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...