Jump to content
SAU Community

Recommended Posts

Yes, you guys heard correctly. I know that everyone says r33 ecus are impossible to remap, but I have two of them right here.

I have for sale 2 remapped r33 ecus. As i'm sure you're all aware, when you up the boost on the stock ecu, timing is retarded severly, and the mixtures go really rich.

Both of the remapped ecus eliminate rich and retard. Ignition timing is advanced quite significantly throughout the rev range too, so they should make more power, more torque, be more responsive and have faster turbo spool.

I bought both of these ecus off the forums here, but I have had a change of plan for my car. They are both from famous japanese tuning companies. The ecus suit r33 rb25, with stock afm and stock injectors. Works to optimise the stock turbo, or aftermarket turbo (up to the power level that the stock injectors and afm support). Runs perfectly on 98 octane petrol (yes, they have been tested with a wideband air fuel ratio meter).

Price: 500 each TO YOUR DOOR via express post .

Contact: PM or call me on 0403 211 482 (Chris)

Edit: forgot to say, speed limiter has also been removed (of course :thumbsup: )

Edited by MANWHORE
Link to comment
https://www.sau.com.au/forums/topic/174728-r33-remapped-ecus/
Share on other sites

lol... turbo tune on south road do a complete standard r33 ecu remap for $500. Everything you can tune a powerfc to do, they can do to the standard ecu. That price includes everything from A-Z in tuning a skyline.

Hey dude.. where are you located?

Also where did you get these from?

Am i able to test it before i purchase it?

Is it suitable for stock side mount? and then later suited for a fmic if i ever get one? or even a 34 side mount?

Currently just got full exhuast, pod, and little tad more boost..

Got any graph figures?

This ecu suited for a Series 2 manual?

If i do get this ecu, can a tuner be able to check it on dyno? and maybe even tune it a bit?

Or is the ROM untune able?

Got any pics?

Also if i sell this ecu, can i just put standard ecu back in without any problems?

cheers

edit: also how lean and rich is this ecu? if that makes sense?

Edited by siddr20

Hi sid

I'll try and answer all of your questions.

I'm located in st ives

The ecus are from japanese tuning companies (but works with 98 octane petrol fine)

of course you're able to test it first. I would prefer that you did - that way, we're all happy. I'm not here to sell stuff that isn't suited to people's car.

It most definitely is suited to the stock, fmic or 34 sidemount. Refer to my post above. Once you increase airflow to a certain level, car will go rich and retard. the map on my ecu doesn't do this. Even with the stock sidemount, it'll make more power, torque etc, because it has more timing everywhere

dyno graph is useless, because power is dependant on mods. I don't believe in dynos. I don't care about power figures. I much rather road testing with a wideband o2 sensor. Knock can be monitored by monitoring knock sensor voltage on a laptop

sII manual - haven't tested it on an sII manual. Worked perfectly on an sI manual.

You're most welcome to test it on a dyno. The ecu has a chip socket in it now, so if a tuner knows how to remap it again, sure, he can burn a chip and put it in.

You sure can - unplug it and plug the other one back in

yep. one was sold to me.

it seems like its normal from around idle - 3k rpm then its all smiles from then on. i felt a difference straight away.

and the fact that it can be re-tuned via a new chip (i didnt know that) is even better.

thanks mate. will keep you posted on my 1/4 times.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...