Jump to content
SAU Community

Recommended Posts

  • Replies 453
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Alright guys this is where it stands tonight so its pretty much how its gonna be,

there is a meet @ stud park that will go to the pre meet at Kmart campbellfield.

main meet in little river at the shell/bp servo

cars join in from toquay rd.

list updated and its gonna be big, just so people know, with regards to the photo, it will be done in 2 lots or even 3. depends on how many cars we have.

how come so early? :P

is the 'main pre meet (k mart)' like on the way to the main meet point (shell servo or what ever) from stud park or are we going out of our way to meet with them. Only reason why i ask is cos of petrol $ :P

we are meeting up early so we can get to the k mart pre meet early grab breakfast with the boys meeting there and head of.

will take around an hour or so to get there so just making sure we dont tie others up.

its not really out of the way and wont take that much out of your fuel so u should be fine. best to tank up in the morning and when we all meet up at sheel at the main meet point tank her up again just to be on the safe side.

WOOT cant wait.

yeh on the princess there, but after the meet point on the way to geelong i think there is only 1 overhead cam. before meet when we heading there ill slow down so every1 knows.

Err... along Princess Highway on the way to Geelong. I'm sure there's a few hidden cameras if i'm not wrong?

there's 2-3 on the way to geelong and most of em are clearly visible (except for the 1's that are on the back side of the overpass)

the servo is a BP...not a shell.

little mr weather man says: cloud developing during the day with late showers. hope to god it doesnt rain huh! as long as i get at least a few hours with sunroof open ill be a happy camper!

really lookin forward to it, not lookin so forward to the 6am start to get to stud park but ahh well! i will most likely be bringing a +1 too (32gtr). not sure where he is gunna meet us yet!

cant wait!

brett

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...