Jump to content
SAU Community

Recommended Posts

Just checking if anyone has ever hit their speed limiter in an R33, and what it's like (harsh or gentle). I have been track racing and been getting very close to the 180km/h and wondering how it feels when it kicks in.

And yeah, I know how to disconnect it, just wondering if it's worth doing.

Thanks

D

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/
Share on other sites

there is a wire which u can cut apparently or put a switch in its place. I dont think its worth it unless u are gettin to top speed where u can go more. I just reach under 180 at ippy raceway i dont think ill reach much more but it might be worth doing :P if u want to go fast lol

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-362764
Share on other sites

if you can find a wiring diagram of the computer, its wire number 53!!

The speed limiter is soft, and it appears more closer to 195kph on the speedo. The stock speedo is way out when going that fast.

I have checked it against my RSM.

A switch is the way to go, but not essential. I have had mine up to 240kph so far now...... open road

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-364792
Share on other sites

i've hit my speed limiter before. the car just suddenly nose dives due to the lack of acceleration, but once it drops below 180, it picks up again, and keeps doing this. when i hit it, i just back right off...doesn't feel as harsh as rev limiter, but maybe cos rev limiter's hit in the lower gears.

no such problems now with the power fc

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-368112
Share on other sites

I suppose that disconnecting it would be cool but given the recent news over the haul by police on hooning and the results they have had over the long weekend, in the interests of keeping your car etc. is it possible to disable it for racing and then put it back on for street driving. It appears that cutting a wire seems permanent and was wondering if there is a way of having it so that it can be turned on and off.....anyone know if this is possible?

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-370923
Share on other sites

I can't see the point of having a switch for street and track... No matter where you are (except NT) whether you're doing 175kph or 185kph, you're still doing a bit over the limit :D... It's not like your speed can sneak up on you that high :-)

I have no speed limiter (and the wire 53 isn't cut - interesting, eh...)...

As CMS Drifter said, just install a switch... Dick smith stock them, and they're pretty easy to fit :-)

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-372834
Share on other sites

Its not soo much in relation to how fast the speed catches up with you...rather if you modify your car (eg. take the speed limiter off) and are involved in an accident, even if you pay insurance the insurer may refuse to cover you. This may depend on whether you inform your insurer of the modifications made to the mechanics of the car..which im guessing they would need to / or should know about given how anal they are about items fixed to your car.

Furthermore charges could be applied should you be deemed to have modified the car to an extent that it is unroadworthy and hence driving an unroadworthy and unregistered vehicle which is an offence.

Nevertheless, each to their own....was just something of interest sake i guess more than anything.

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-372962
Share on other sites

Just checking if anyone has ever hit their speed limiter in an R33, and what it's like (harsh or gentle).

yes, your accelerating and all of a sudden you feel the engine stop reving and it feels like you slipped in the clutch it isnt rough or anything, and when you take you foot off the accelerator and the speed srops again you put your foot back on the pedal and it accelerates again :P

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-374110
Share on other sites

"i seriously doubt that any insurance company would go to that extent to prove that it was unroad worthy"

Be careful of that one mate....if an insurance company wants to get out of paying on a claim they will.....seen it often...i work in personal injury (mva etc) and they are harsh. Once the insurer was finished with you....then come the cops...who knows...

Just food for thought really. Just dont want people paying hundreds and hundreds of dollars in insurance and then find that they have made alterations which makes the policy invalid. I guess its best to let them know and find out now if your covered with the "slight" changes rather than getting a nasty shock when you make a claim after a crash.

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-374136
Share on other sites

my car doesnt have a speed limter due to aftermarket ecu... however, if you were to cut the wire the insurance company couldnt not pay out... as it is still road worthy. Prove me wrong and post any ADR's / legislation etc that says a car has to be limited to 180km.

another note is... i wouldnt just cut wire 53. There is a reason why greddy, hks, tomei make speed limit removers... that wire into both wire 53, 59, ground and +..

Link to comment
https://www.sau.com.au/forums/topic/17524-r33-speed-limiter/#findComment-381062
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...