Jump to content
SAU Community

Recommended Posts

I have for sale a set of Tomei Poncams for series 2 R33.

BRAND NEW IN BOX!

1X Intake

1X Exhaust

256 degree cam.

No valve springs needed.

They are for series 2 R33 built from Sep 97 part.

Part number is 143050.

Asking $700 delivered FIRM!

Or swap for series 1 Poncams part number 143020(must be new)

PM if interested

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/175669-fs-tomei-poncams-rb25det-series-2/
Share on other sites

Sounds like they will fit my RB25 NEO! Would I be right?

I dont think they fit NEO engines.Tomei have a different part number on their website.But the best way to find out would be to take your car to your tuner and get them to tell you what part number and cams would suit your car. :D

Does anyone know what effect the CAMS have on fuel economy?

Speaking generally..

Mild Road Cam 257deg-260deg. Gives low end improvements and used in unmodified engines suitable for all car types and gives a smooth tickover. Fuel economy may actually improve and power and responsiveness will be greater.

Fast Road cam 270deg-285deg. Good compromise for a road car the tick over is still fairly smooth and emissions are within legal limits. A good choice for a car used daily and for weekend track use and perfect for a hot hatch. This profile still gives reasonable fuel economy and a choppy tickover.

Competition cams 290deg-320deg. The best performance profile for an engine which works continually over 3000 revs. The tickover is very lumpy and irregular and the car is lumpy to drive round town. Fuel economy is pathetic and it is unlikely that a car with this fitted will pass any kind of emissions test.

Edited by Shift_Lock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...