Jump to content
SAU Community

Recommended Posts

All,

After thinking long and hard over what new car to get, I have decided to stay with a GTR, Im keen to do some more serious track times so I am looking at an R32's GTR, which I can take one step further then my R34.

I have found a real (Checked with Nisan) R32 GTR Vspec 93 model 77,000 Km, mods are listed below.

HKS 2540 turbos

HKS 264 cams

HKS Turbo Manifold

HKS Dump pipes

HKS Header pipes

HKS Inlet pipes

HKS Pods

HKS Intercooler

HKS Hyper Damper Suspension

HKS Remote oil filter and cooler

Adj Cam sprockets

OS Twin Plate Clutch

Metal Head and other gaskit's

Apexi PFC and hand controller

Upgraded fuel pump

800CC Injectors

90mm exhaust

Cuscal Remote catch can

Cuscal radiator deflector

17in Advan wheels

Caster Adj front

Boost gauge

Turbo timer

The Vspec STD Brembo Barkes, Vspec diff and Brake vents

UAS Dyno showed 280KW at 15PSI (With 2.5'' crap Cat) and Comp check was approx 140PSI on all 6, under carriage is a straight as they come and the interior is in good condition.

I plan to do some additional mods.

Water Menthol injection, Fat belly Cat, RB25 Airflows and pods, Sump Baffle, DBA rotors and Frodo 2500’s, Upgrade the radiator, Camber kit and alloy bushes, Retune.

Buy price is $25K with 12 months rego.

What do people think about the car and the price?

Im thinking of placing a deposit today, so appreciate the feedback.

Thanks

post-42-1184104281_thumb.jpg

post-42-1184104286_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/
Share on other sites

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

That is the intent! Im moving work location and will be doing far less street Km's so I can allow this car to be a lot more aggresive then I have with my previous GTR's.

I guess my question is around market price for a car like this. The ass has dropped out of the market a little, and I wonder if I am paying too much for this car?

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222957
Share on other sites

Hey car sounds good, price sound close to being right possibly a little high.

I know godzl1975 is selling his car on the quiet and i was very tempted to buy it but i didnt have the bank to support it in the long run.

His car is unbelievable! You should check it out.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222963
Share on other sites

Hey car sounds good, price sound close to being right possibly a little high.

I know godzl1975 is selling his car on the quiet and i was very tempted to buy it but i didnt have the bank to support it in the long run.

His car is unbelievable! You should check it out.

Thanks, car looks good, I have sent him a PM for his number, so we discuss.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222974
Share on other sites

so who put the metal head gasket in? was it done in aus? were any other internals done?

with those mods and shitty looking wheels like that tells you the car wasnt sitting in a show room.

my money is on it craps itself before the 100k service..

my opinion is to buy a gtr with great body and screwed engine for about the $15k mark and use the 10k to rebuild your own engine..

that way you know what you've done to is and work has warranty (to some degree). also the car feels more like your own becaause you have decided what you want from it.

only dis advantace is that you wont have the car for a while while an engine is built.

thats the way my brain works ;)

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3223159
Share on other sites

so who put the metal head gasket in? was it done in aus? were any other internals done?

with those mods and shitty looking wheels like that tells you the car wasnt sitting in a show room.

my money is on it craps itself before the 100k service..

my opinion is to buy a gtr with great body and screwed engine for about the $15k mark and use the 10k to rebuild your own engine..

that way you know what you've done to is and work has warranty (to some degree). also the car feels more like your own becaause you have decided what you want from it.

only dis advantace is that you wont have the car for a while while an engine is built.

thats the way my brain works ;)

The car looks to have had the work done in Japan a fair while ago, except for plugs its as it left Japan.

I started with that mind set, accept The parts and Labour bill hit almost $20k (Internals/turbo's/clutch/ and acc's), and I have had trouble finding cheap late 32's without damaged or rusted rails. I have only been looking for 3 weeks both here and in Jap auctions.

Point taken but I have run out of time. I loose the 34 in a couple of weeks and need wheels.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3223203
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...