Jump to content
SAU Community

SAU Caps & Beanies... just made a deal, any1 want one?


Recommended Posts

Just made a deal with a manufacturer that should see us all wearing an SAU cap for about $20 each.

Its made in the same factory as ecko (the gangsta clothes label with the rhino logo) caps.

The design of the cap is as follows: Elastic base rim (no straps at the back) 12x16 cotton twill sandwich cap with curved visor.

Here are the options:

  • skylinesaustralia.com in a marquee around the base of the cap.
  • big f**koff emblem in the middle on the front
  • any other design that will fit on the cap

Please suggest some designs which I'll then implement and send to the manufacturer.

Here's the catch. We have to purchase 100 of the fvuckers coz their minimum run is 100. (theoretically 102, but they'll give it to us for the price of 100).

please vote "I will buy" if you want one. Once this tally hits 100, then I will make arrangements for payments and then place the order.

Part of the money raised will go to the running of the forums. All purchases from VIC forum goers will get a certain percentage donated to the running of the VIC club. Similar arrangements can be made for other states.

I have attached the ecko cap that they manufacture as a reference.

UPDATE

OK here's what we have so far, we have about 80 odd requests for caps and beanies, so I'll put the order in, now we have to figure out what design we want on the caps/beanies. TO keep it simple we might just go with the same design on both.

here's a mock up of the cap that I made, any improvements/suggestions will be appreciated.

cap.jpg

  • Replies 246
  • Created
  • Last Reply

Top Posters In This Topic

ye i'd buy one.

but when u say they make a minimum run of 100 - does that 100 of exactly the same colour/design? coz then we'd all be like wearing exactly the same hat. and at a meet that'd look weird. may as well all wear uniforms.

but yeh, put me down for one.

omg... caps ppl... I'll make inquiries about beanies tho... dunno if they make em, but they make all the ecko head gear and ecko has beanies... will find out

Put me down for a cap and a beanie too!

What about using the typical "SAU" with the lights on either side. I know we have used this logo alot, but it says what we are about.

The "skylinesaustralia.com in a marquee around the base of the cap", is also a good idea.

How about getting the Model of our cars at the back of the cap. eg: 33 or R33.

This is a mad idea, thanks Funky!

Don't think we can get personalised ones for each type of ca; unfortunately it has to be one design only (otherwise I'll have to get 200). Don't know what the go with the designs for the beenie and the caps are as they're clearly gonna be 2 different things.

Here's 3 designs we have atm:

A monogram block... r34 tailights with SAU under it

logo.gif

A block made up of the url cut up into chunks

logotext.gif

A straight line url, probably best suited for around the base.

url.gif

Any other ideas?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...