Jump to content
SAU Community

F.s. Rb25 10sec Setup

CRNAGE
 Share

Recommended Posts

CRNAGE Apprentice

CRNAGE

Posted
Posted (edited)

The engine is out of my r33 gtst that went 10.5 @ 125mph a couple of months ago, new setup is being built so this stuff has got to go!

RB25 long motor, sump to rocker cover, has forged pistons, shot peened rods, prepped crank and block, ported head, genuine nissan head gasket, tomei 256degree poncams, tomei exhaust cam gear. this engine made 480rwhp with 24psi through a gt3540. runs perfect and comp tested perfect before being pulled out of the car. $5000 or very close offer!

polished plazmaman plenum, bolt's to standard runners, 600x300x75 intercooler with polished alloy pipes and turbosmart bov to suit the plazmaman plenum, incuded is the exhaust manifold to suit a gt3540 and a 38mm wastegate but no turbo and gate. plenum cooler with pipes and exhaust manifold $2450 or very close offer!

850cc sard injectors(side feed) with rail and sard reg $850 or very close offer!

apexi power fc and z32 afm with harness $1000 or close offer!

or the complete engine with all the above for $8500, all you need is a 3540 and a gate and you got a reliable 10 sec package!!!!!

Als raceglides built c4 auto, full roller bearing, all the good gear inside, deep pan, transbrake, 3500rpm converter and a b&m pro ratchet shifter and tailshaft for r33. $4200 or close offer! box is awsome and still usable on the street!

offers only by pm or you can call Alex on 0413 311 919.

Edited by CRNAGE
Link to comment
https://www.sau.com.au/forums/topic/176318-fs-rb25-10sec-setup/
Share on other sites
CRNAGE Apprentice

CRNAGE

Posted
  • Author
Posted
Hey mate. Do you have any more specs of the auto. What power was it built to handle??

what specs are you after? it will cop 800hp no prob, this box will go in the 9's!!!

spudsr33 Enthusiast

spudsr33

Posted
Posted (edited)

Where you located i want that power fc. Does it come with the hand controller and the wiring set up for a series1. P.M me asap........ P.S is his for a manuel

Edited by spudsr33
CRNAGE Apprentice

CRNAGE

Posted
  • Author
Posted
Where you located i want that power fc. Does it come with the hand controller and the wiring set up for a series1. P.M me asap........

sydney, no hand controller and yes its for series 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Great pic  
    • acsplit
      R32 Gtst - Track Car

      By acsplit · Posted

      Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...