Jump to content
SAU Community

Recommended Posts

I spent over 4h hours today watching someone trying to upgrade my immoboliser to an alarm just to fail. Does anyone know of a good place to do it for a V35? I am not going to name any names here, but I think that guy knows a thing or 2 about alarms, just maybe not for a V35.

The OEM one should of been removed and an ADR approved one fitted for compliance, what is fitted to start and what were you up grading to.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3228356
Share on other sites

I get my AUTO WATCH alarm fited for $380. That guy spend 3hours analysis all the wires of the security and immoboliser, at last he successbully install a alarm unit and keep the key untouched.

What I got:

Untouched key, all funtions run as factory set.

Alarm system

windows sensers

A suprised funtion, when I click unlock bottom, the tail ligh will on for about 3 second, that is really cool as I seldom see what my car's tail light looks like.

As I understanding, He didn't upgrade the security level, he just put an AUTO Watch unit in between the factory security unit and control, so all the singal will go through the origional unit and then the AUTO Watch unit, then to the control unit. the senser and siren are link to the AUTO WATCH unit. In case if some thing wrong, either from factory code system or new senser, The siren will speak lond.

Pretty good.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3231404
Share on other sites

My understanding is the OEM one is to be removed all together as it is not the best plus it does not comply with the ADR's, the one I have fitted activates the boot and door opening/locking as per original in one unit not separate to the key, but people fit the alarm as a separate unit to the key as they cant merge the two together.

It also self arms after a while but I have it set so it doesn't lock the doors, as I have said in other posts the electronics in these cars are not simple or for the faint hearted.

Chris will know more on this then me.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3234574
Share on other sites

yep alarm upgrades are the go on these. last 350z I did (similar architecture) they had put an alarm over the OE item- very messy and it didnt work quite right and it was VERY erratic.

nigel,

the OEM thing is a plug and go item anyway. fairly easy to ID and strip.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3234825
Share on other sites

yep alarm upgrades are the go on these. last 350z I did (similar architecture) they had put an alarm over the OE item- very messy and it didnt work quite right and it was VERY erratic.

nigel,

the OEM thing is a plug and go item anyway. fairly easy to ID and strip.

All I know it is a pain having to use the key and alarm separate as I had another one to day and it is dodgey.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3237142
Share on other sites

The OEM one should of been removed and an ADR approved one fitted for compliance, what is fitted to start and what were you up grading to.

Anything that will stop my wheels being taken off. So I was thinking shock sensors. Microvave sensors I think are also cheap to install. Would be cool to have sonic sensors in the front so it warns a car in front when it is parking and getting too close, but that will probably cost way too much.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3241283
Share on other sites

are you in syd? if so, I know a very good guys can install alram for our car. He can disable the chips from the key to an individual, then you can get a copy of key for few bucks as spare. no way to spend $500 up for spare key from japan!!!

You mean he can also replicate the key so you can get a spare? Wouldn't mind that as recently my key stopped working. Replaced batteries, but still dead. Going to check out contacts today and clean it out.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3241288
Share on other sites

Anything that will stop my wheels being taken off. So I was thinking shock sensors. Microvave sensors I think are also cheap to install. Would be cool to have sonic sensors in the front so it warns a car in front when it is parking and getting too close, but that will probably cost way too much.

parking sensors inthe front is easy. needs a switch to control them but thats it. to do them you need the car paint code and 3-4 hours of time.

as for security - do you want the key only or key and remote? I'll make a few suggestions based on that.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3241473
Share on other sites

I got my key to work now, so I am happy with either. I have auto watch remote together with my key to disable the immoboliser.

I have to find out what I have fitted to my car, all in one boot, doors, self arming everything, I never use the origional key to open or lock the door, as I said I had to use a car with both fitted and it pissed me off.

What pisses me off more is you guys are paying good dollar and they are not even doing it right, this is ADR 82/00 which is "Vehicle Standard (Australian Design Rule 82/00 – Engine Immobilisers) 2006"

People think complying cars is easy so have a read of this and this is only for the requirement to put in a basic Immobiliser.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3245821
Share on other sites

amen to that. too many hacks make way too much of a mess of things. great for me , I get to fix them, bad for the customer as they still shop on price and know no different.

one that really spring to mind are the dealer fitted and manufacturer fitted (locally) alarms. the brant (nee subaru now) items I can find and remove in about 3-4 minutes due to the way they are done. they stop some people but not all. same goes with these cars (V35.) reason that you may have ended up with a key (for unlock) and a remote is they simply did not understand the car. these cars run one module that controls the ENTIRE car. fry it and it gets VERY expensive very quickly. some of the jobs I have seen from shops with ADR alarms shock me. (see below.)

click this:

look at the 350Z and the R33. both are shops.

http://www.audioexpress.com.au/shop/HOS/

(still not finished with the pages so its a bit buggy :P )

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3246435
Share on other sites

  • 2 weeks later...
amen to that. too many hacks make way too much of a mess of things. great for me , I get to fix them, bad for the customer as they still shop on price and know no different.

one that really spring to mind are the dealer fitted and manufacturer fitted (locally) alarms. the brant (nee subaru now) items I can find and remove in about 3-4 minutes due to the way they are done. they stop some people but not all. same goes with these cars (V35.) reason that you may have ended up with a key (for unlock) and a remote is they simply did not understand the car. these cars run one module that controls the ENTIRE car. fry it and it gets VERY expensive very quickly. some of the jobs I have seen from shops with ADR alarms shock me. (see below.)

click this:

look at the 350Z and the R33. both are shops.

http://www.audioexpress.com.au/shop/HOS/

(still not finished with the pages so its a bit buggy :) )

Yep look at my case , the compliance place has f**ked my v35 and i havnt had it for nearly 6 months

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3275608
Share on other sites

Yep look at my case , the compliance place has f**ked my v35 and i havnt had it for nearly 6 months

It is stories like this that make me glad I decided to buy a car from a local dealer and pay a few thousand dollars extra and get to test drive it first and see that everything is working correctly.

I hope you get it all sorted in the end but does the saving nd waiting seem worth it now?

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3281091
Share on other sites

It is stories like this that make me glad I decided to buy a car from a local dealer and pay a few thousand dollars extra and get to test drive it first and see that everything is working correctly.

I hope you get it all sorted in the end but does the saving nd waiting seem worth it now?

Well i drove the car to compliance, and i got the car at a top price with everything i wanted on it so yeah its still at the moment worth it

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/#findComment-3282285
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...