Jump to content
SAU Community

Recommended Posts

Bee R make a rev limiter and launch controller that you can install in cabin.

It basically allows you to set your desired rev limit. Unlike factory rev limiters which cut fuel, this one cuts ignition, so fuel still goes through.

When they hit the hot turbo they ignite and u can get your flames comming out of the exhaust like the movie.

However it will drastically shorten the lifespan of your turbo.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Zensoku

but that is what the "ricey arming red missile switch" is for!:bahaha:

Maaaan I had that shit on my strawberry face 180 back in the day as a kill switch for my amp. Back then the only place you could get it was at Jaycar, and it fitted a corresponding PSTN switch... thought I was pioneering shit, until at autosalon my car was right nex to sum otha f00 who had done the same thing... so naturally I had to remove it...

Now every shop carries it. :P

BTW kidd... here's an interview with Lieberman... it belongs to Hiro from Motorex.

http://www.nissanperformancemag.com/march03/lieberman/

NPM: Was the new color scheme strictly chosen for use in the movie "2 Fast 2 Furious" the sequel to "The Fast and the Furious"?

ff2skylinespyshot_tn.jpg

As it will appear in in the upcoming movie "2 Fast 2 Furious"

C.L.: Yes, The car is silver in the movie. It looked awful, so we just got done painting it back to blue. Why anyone would want to put SS Camaro stripes on a JDM Skyline is beyond me, but the guy designing the graphics (Keith Burns, Prod Designer) hates cars and generally needs his head examined when it comes to car accessorization, just my opinion.

NPM: Sounds as though you weren't too happy with their choice and couldn't wait to get it back to the original look afterwards.

dscf0944_tn.jpg

C.L.: The gray/blue thing was ok with me. But the aforementioned clueless designer covered my carbon fiber nitrous bottles with chrome vinyl…it was the first thing I changed when I got the car back. In fact, this dude covered every carbon fiber surface with colored vinyl. As you can tell, I'm not very happy about his choices

Hahaha spoken like a tru Skyline owner :P

watched the movie and was also eager to find out what fuel they run. as for those flame thrower kits i had one on my old car and it was the spark plug typr but only ignited the fuel on with the switch was pressed and also caused the ignition to die ( like doing a key banger with out the stress) as for the REAL car comment if you watch a top fuel drag car they have continuos flame for the hole time they drag. aren't they real cars NZM.031

my skyline can pop flames and nearly all the turbo cars i know can pop flames run a different fuel like menthanol or high grade av gas and you'll get more flames

Originally posted by RedLineGTR

the non funny thing would be if someone had it setup like that and one of his mates didnt know imagine if he pressed them...the plenum would go pop..

Yes, I've lost count of the number of plenums I've heard of going 'pop' from nitrous use. Also imagine what would happen when the car finally rolled to a stop.. why at least 500 porcupines would then drag the owner and his friend from the car and beat them senseless. Because as we all know this is what happens when you use too much NOS. Just like parts of the floor falling off really isn't it, you know -- the excess NOS finds it's way to the seam welds and unwelds them.

Zensoku,

You should put little NOS stickers on the horn buttons and charge twice as much for the steering wheels I reckon.

Originally posted by rev210

You should put little NOS stickers on the horn buttons and charge twice as much for the steering wheels I reckon.

Like it isn't already happening in Sydney and the Gold Coast.. its on all the Wannabe rice boys shopping lists...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hey everyone. Is there a way I can get the original window sticker (maroney label) for my 1995 R33 GTST? I doubt I’ll be able to ever get it but it’s worth a shot to ask
    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
×
×
  • Create New...