Jump to content
SAU Community

Recommended Posts

last friday there was an accident on the bridge in town...in stop/start traffic for a good hour...then as i left the bridge and traffic i noticed my steering had become extremly heavy and i had no speed reading (or odometer)

I had been brainstorming with a mate and we're out of ideas...the most logical reason we could come up with is the speed sensor shat itself therefore telling the power steering that the car was travelling faster than it was...therefore making the steering harder....

but why...has anyone else had this problem know how to fix it etc...

thanks in advance

Brock

Link to comment
https://www.sau.com.au/forums/topic/177785-no-speedo-or-power-steering/
Share on other sites

hey buddy

had the same problem as u before.. is the hicas light on?

the reason the steering wheel is hard is because the hicas system is not detecting the speedometer..

as stated above its probably cause your speedo cable has snapped.. as that was the same with mine..

u can find one cheap of the forum for probably $50 or so.

nissan sells it for way to much..

hope it helps

yeh man...but the hicas light has been on since i picked it up in feburary...but the rest fits the problem....i need the car back now...so nissan will probaly have to do...i live in Mackay in QLD...not much chance bumping into someone with one....

hey brock,

Go to jam on monday and see if they have one kicking around, they have a container filled with gearboxes and half cuts. might be able to find one. I'll come with you on monday and talk to aaron. if worst comes to worse and you have to order one. i know a car thats off the road that has an rb20 gear box in it. with a working cable. hint hint.

Big Bro

  • 2 months later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...