Jump to content
SAU Community

Recommended Posts

Ok, so i installed them tonight

Gripes:

They have no thorough instructions

the ones that are in it, only showed how to remove the old coilpacks, and its not just a reverse installation...

Second

You cant just reinstall them into your old coilpack holders

it doesnt work...at all

you can install one bolt on each one, but when you put them on the car in the holder, its misaligned

so i didnt use it

BUt, when you install them without the holder, they are rather secure

they flop around but dont pull upwards, we shall see how it works out

It helped my idle immensly

its still high, but much more even

i also replaced plugs along with the coilpacks

TOmorrow ill bring it out for a test run before i install the wideband and SAFC2

see if it improved my boost problem at all...

anyways, more to come

Link to comment
https://www.sau.com.au/forums/topic/177931-splitfire-coilpacks/
Share on other sites

the one thing I did notice .. whilst reading the instuctions on how to change the coilpacks

I think the NEO uses a slightly different configuration than the non neo motors.

Looking at the how to article.. it seems that on the non NEO motors.. the coilpacks are grouped in 3 and attached to a plate ( 2 plates for 6 coilpacks ) on the NEO the coilpacks are just held in with 2 screws per coilpack. If you got the right coilpacks for the motor . and they are not a direct fit , I would be complaining or seeking re-embursment.

there is only one set for all years WGNC34

the non neo has the bracket that are grouped in 3

ill make some kind of bracket , not a big deal

just didnt know if it was only me that had that problem or not

maybe i have an odd holder?

i dunno

doesnt work for me...ghey

i cant speak for performance

but it improved my idle alot, its alot more smoothe

im installing my HKS acutator in like 10 minutes nad ill let you know how it performs once i get my boost back.

i think my wastegate is failing

man its going to be a bit of a headf*ck to make the bracket up accurately .

why not just send em back and say they dont fit? will be a lot easier.

from what I could see of the bracket that groups the 3 coil packs together it looks like its

made out of reasonably thick ally plate. Or why not just see if you can get that plate from

a wreakers etc?

well, theo problem is i bought them from a used place, but htey wre brand new

i got em for 350 USD

which is like 250 less than everywhere else

SO...its owrth the hastle, ill just trim off the mounting parts that cover hte larger holes, and get a piece of metal and make like a T with the bolt and metal to hold htem down.

shoudl only take an hour or so

well, theo problem is i bought them from a used place, but htey wre brand new

i got em for 350 USD

which is like 250 less than everywhere else

try buying your parts thru www.nengun.com (they are in Japan)

They are only $375 USD new for the right ones

I have been called worse haha..

no its just the 1st time doing it .. was just a bit of a pain .. compared to some of the other cars I have worked on . That and the breather hose being rock hard etc etc etc..

but .. got my good 1/4 drive ratchet set.. so those pesky alan keys holding the cover on dont stand a chance now.

plugs are hard to change?

Your crazy for saying that!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...