Jump to content
SAU Community

Recommended Posts

SOLD $1300

For Sale - Nissan Skyline R33 GTR wheels. I have a set of 4 for sale.

The wheels are made by BBS, they are a forged alloy wheel, not a cheap cast item.

Condition - These wheels look the same as when they were made, they have no marks on them, no scratches in the paint, no buckles, or even marks from where weights have been fitted. Hopefully the photos can show potential buyers the immacualte condition.

Size - 17 x 9 inches

Offset - +30

Stud pattern - 5 x 114.3

Not attached in photos, but these wheels do come with Genuine centre caps, will also provide chromed valves.

post-34017-1185445883_thumb.jpgpost-34017-1185445905_thumb.jpg

post-34017-1185445942_thumb.jpgpost-34017-1185445969_thumb.jpgpost-34017-1185445997_thumb.jpgpost-34017-1185446051_thumb.jpg

post-34017-1185446104_thumb.jpgpost-34017-1185446126_thumb.jpg post-34017-1185446175_thumb.jpgpost-34017-1185446197_thumb.jpg

Please note the condition of the whole wheel, not just the face - stud holes, inside edges, outside edges.

These wheels fit almost all RWD Japanese cars and 4WD Nissans. They are the perfect upgrade for GTR, GTS-T, Silvia, S14, S14, R34 GTT, and many others.

Weight - Without tyres I have found each wheel to be 10kg.

Location - Sydney, Thornleigh area (2120). Sorry, no interstate sales, must meet in person.

Price - $1400

Contact details - Please reply to the thread, or send me a PM. I will reply usually within 1 or 2 days. I will give my mobile number to interested buyers.

At the moment no tyres are included in the sale, but I am trying to obtain some brand new 235/45/17 Pirelli Pzero tyres. These will be included but at a increased price rate (still cheaper than retail).

Adrian

Edited by Sticky
Link to comment
https://www.sau.com.au/forums/topic/178217-r33-gtr-skyline-wheels/
Share on other sites

Well, it depends on how much the tyres cost me. My mates dad works for Pirelli in the Motorsport division and is fairly high up.

So hopefully I should be able to get the brand new tyres for about $200 for all 4... and I will only add whatever the tyres cost me to the price.

Retail they are like $300 each, So they will be a bargain.

Adrian

Anyone for a kidney?

I need to sell some rims, and FLY4DR needs to sell a kidney.

The photos dont really do the wheels justice, they look even better in real life.

DAMN if u can get sum new rubber that price ill buy some of yah

As much as I would love to get people tyres at that price... I can't.

But if you want cheap rubber and don't want the wheels, it may be worth your while to buy the wheels with the tyres when I get them, then resell the wheels at a cheaper price than I'm asking.

Ronin 09 - No these wheels haven't been repainted... But yes they have been powder coated, they were in perfect condition before but they weren't silver...

They should stay in this condition for many years to come. Done properly - Acid cleaned before powder coating.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...