Jump to content
SAU Community

Recommended Posts

hey guys

just installed sound system yesterday..

i give accel hard once... and notice i lost some power because of the weight of sub box..

you know sub box is pretty heavy... just like one person added up in car..

also when you turn volume high.. the boot lid is shaking baddly... make annoying sound.. you know you cant hear this shaking from inside but this sound is all you hear from outside...

and... the boot is so~ full... no space for anything...

i tried to dead that shaking by soft material such as forms... but... the sound is actually come from boot lid.... dont know what to do..

better sell one sub and box... and buy mdf to fit another sub in boot...

anyone wants it? rockford fosgate P1 12inch...

Link to comment
https://www.sau.com.au/forums/topic/178496-two-12-sub-and-sub-box-in-the-boot/
Share on other sites

anyone wants it? rockford fosgate P1 12inch...

Free? Awesome send it my way! :D

You can get rid of most of that rattling if you whack a whole heap of Dynamat into your boot + bootlid + tie down all loose wirings in the bootlid from the brakelight and in the rear quarter panels etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
    • Someone needs to copy it, improve it aesthetically, make it DBW ready from day 0 and send it to the motherland Chynah for my relatives to cast it and mass produce it 😅
×
×
  • Create New...