Jump to content
SAU Community

Recommended Posts

ok well i dont know where to post this but here:

got a 96 s14 and im swapping in a rb26dett i have a rb20 trans bolted to it.

i moded the stock rb26 oil pan to work in the chassis and just purchased tophatperformance motor/trans mount kit. also am having the wiring done by them too. heres the questions;

can i use the rb26dett started or do i use the rb20 starter with this swap?

can i use the rb26dett powersteering pump? if so what do i do with the rear steering lines(my car is non hicas)? and if i cant use the pump what works in its place?

anything eles i should look for or need to get/use/have to finish my swap?

thanks all

Link to comment
https://www.sau.com.au/forums/topic/178806-rb26-swap-into-s-chassis/
Share on other sites

Use the 26 PWR steer pump but pull the rear pump vanes out and block the rear hicas outlet, works well do it often to cars i remove the hicas on. On ours i have used a R33 Pump on a GTT bracket (memory hazy) which allows me to keep the 5pk but run it on the AC pulley on the crank... this allows 17mm extra clearance for decent fans on the back of the radiator. FLEX-A-LITE F210 fans are the only way to go... all the others are shite and messy.

Use the 26 starter, same shite from memory.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...