Jump to content
SAU Community

Rb25det Engine, Manual Gearbox Conversion, Plus Other R33 Performance Parts

Julzy
 Share

Recommended Posts

Julzy Rising Star

Julzy

Posted
Posted (edited)

Sadly i've decided to not continue on with my rb25det silvia project, and sway towards the sr20 due to a few reasons... mainly i don't have the time or money to do it. All these parts came out of an R33 GTS-T, i think 95 model from memory, with about 130,000 ks.

RB25DET ENGINE DEPOSIT TAKEN

I just changed the idler and tensioner bearings, timing belt, water pump, power steering belt, alternator belt with genuine nissan parts (i have receipts... over $500 worth alone, at trade prices not including labour). plus i have 6 new spark plugs and two genuine nissan oil filters i'll throw in. I removed the air con compressor, but i'll include it with the engine. Front cover and coilpack covers freshly painted with high temp engine paint. Everything minus turbo included. Has been compression tested and returned a consistent 185psi across all cylinders. Never seen more than 16psi. It's killing me downgrading to an SR. :)

Save yourself the hassle of changing all the above parts when you buy a new engine and get this one.

Price is $1600.

RB25DET GEARBOX DEPOSIT TAKEN

This gearbox is in great condition. comes with a Single Plate Ceramic Clutch (Very Heavy) and all manual pedals, master cylinder and slave cylinder. It's a complete manual conversion for any R33 with balls.

Price is now $1650 for all the above parts and the flywheel and tailshaft.

ITS 460hp Turbo DEPOSIT TAKEN

This is a turbo from ITS (Innovative Turbo Systems in the US, not a dodgy china copy turbo). It's a 460hp Hybrid T04e Turbo with polished compressor housing. Only a year old. There's a bit of shaft play in the exhaust wheel, which is fine considering it's non ball bearing. Still spools up perfectly fine and makes plenty of power. Needs new wastegate can however. will throw in custom polished elbow off compressor. Cost $2500 originally.

Price: $800.

Garrett Front Mount Intercooler Kit DEPOSIT TAKEN

This is a fmic that was supplied by WASP performance in QLD. it's got a garrett core, with a piping kit.

Price - $400 Price dropped to $340!!

Wolf 3D V4 ECU (R33 Specific) - SOLD

Unlike most of the wolf computers out there that are universal and require hacking up your wiring loom, this one is r33 gtst specific, so plugs straight into your old loom. Also enables you to get rid of that AFM, saving you the cost of the z32. Comes with hand controller. New these cost over $1500 with the hand controller.

Price $1000

GFB STEALTH FX BOV (Atmo/Plumback)

Not much to say really. It's the same as the one in the link but in Red and to suit R33 gtst. Comes with the additional trumpet which is available for an extra $35. So that's $565 new from GFB. It's practically new, not a mark on it.

GFB Site

$400 delivered. Now $350 Delivered

Still undecided if i want to use or sell the rest of the bits, so i might update with more. For the moment these are the only pics i have, I'll take some proper pictures on saturday.

call on 0423 366 118 if you have any questions.

post-23316-1185877471_thumb.jpg

post-23316-1185877490_thumb.jpg

post-23316-1186111791_thumb.jpg

post-23316-1186111812_thumb.jpg

post-23316-1186440632_thumb.jpg

post-23316-1186440661_thumb.jpg

post-23316-1186440692_thumb.jpg

post-23316-1186440723_thumb.jpg

post-23316-1186440754_thumb.jpg

post-23316-1186440820_thumb.jpg

Edited by Julzy
mook1 Mentor

mook1

Posted
Posted
Sadly i've decided to not continue on with my rb25det silvia project, and sway towards the sr20 due to a few reasons... mainly i don't have the time or money to do it

and your a pussy..!! pussy..

ISC-Performance Veteran

ISC-Performance

Posted
Posted
Hey

Got pictures of the intercooler kit?

I assume it will fit R32 with minor adjustments? ;)

Thanks,

Abu

Will definetly fit onto an rb20det.

Ryan

Julzy Rising Star

Julzy

Posted
  • Author
Posted

i'm getting some proper pictures on saturday.

All parts are locate din Epping, Victoria.

I can post at buyers expense if he/she organises it.

abu Grand Master

abu

Posted
Posted
i'm getting some proper pictures on saturday.

All parts are locate din Epping, Victoria.

I can post at buyers expense if he/she organises it.

PM me when you get pictures of the intercooler kit, I am looking at buying one asap.

PM me a rough price for pickup as well.. :sleep:

Thanks,

Abu

Julzy Rising Star

Julzy

Posted
  • Author
Posted

pics added of the fmic. as i said i'll take better pictures on saturday, but these are the ones i already had on my phone.

Above prices are for pickup, no delivery included (exluding the BOV). :unsure:

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • MBS206
      Chris' Toyota Mark ii JZX110

      By MBS206 · Posted

      I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • GTSBoy
      Chris' Toyota Mark ii JZX110

      By GTSBoy · Posted

      I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...