Jump to content
SAU Community

Recommended Posts

nissan 33gtst

94 model

m-spec

manual

2 door coupe

17' avs mag wheels

new tyres

custom green paint

veilside bodykit

carbon bonnet

running gear:

full built rb26dett

weisco forged pistons

cunniham rods

nismo bearings

energy oil sump

tomei oil pump

n1 waterpump

port polished head

hks cams

hks valve springs

str cam gears

jun intake manifold

80mm SZR throttle body

50mm tail bov

custom exhaust manifold

turbonectics t76 turbo 1000hp rated

subzero 55mm wastegate

3/5' full exhaust system

hks muffler

stainless intercooler piping kit

hks airfilter

nismo twin plate

gtr gearbox

os giken gearset

1000hp sx fuel pump

surge tank

mtx12 microtect

1000cc injectors

PWR radiator

oil cooler

120mm front mount intercooler

hks fuel rail

brembo brakes all round

gtr dash cluster

hks coil overs,

full gtr33 interior

blitz boost gauge

alpine cd player

motor has just done 2000kms and been only tuned for running in on .9 bar boost.

pm me or email me only please as im not on here offen at [email protected]

Edited by MR33

if u can get $20k for the running gear why r u selling the car for $19K??? wouldnt cost that much to remove and im sure the shell could be sold for mosre then the cost....

just an idea...

i dont have no room, plus im trying to finish a gtr and i dont want to start working on this one. if people know how much cars cost to built with all the gear i have on this car im sure they know its a cheap buy.

definately a cheap buy. has brembo's, gtr interior and a built rb26, custom respray. definately way too cheap and cant beleive its had no buyer yet. the market is so slow now that young drivers cant legally drive them. good luck with the sale mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...