Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Nismo_Boy

you saying I can't hold my liquor birty.......

ok.. everyone who comes to the bbq can donate $10. then out of nismogirl and nismoboy - whoever can hold the most alcs can have the money...

and the winner will have the name nismo boy.. and loser nismo girl... so most likely we will see a nick change :)

shutupa your face!!, we came from Melb 9 years? ago, and I think dad just wants to go "home" as he has lived there most of his life, that and there is more work there, dosen't matter, when i'm 18 i'm moving back up here (bris) IF we were to go down

Originally posted by Nismo_Boy

there is no way in hell, i'm taken the train!! so if my friend dosen't get paid tomorrow, I can't come.

This might be a long shot but hitnrun might be coming down. I've got to ring him yet.

Oh and petesmith.. btw..

I'm designated driver :) and I dont drink beer... dont even drink much alcohol come to think of it!

Originally posted by NismoGirl

This might be a long shot but hitnrun might be coming down. I've got to ring him yet.  

Oh and petesmith.. btw..  

I'm designated driver :) and I dont drink beer... dont even drink much alcohol come to think of it!

ok nismogirl.. i will go to nimbin for u and get you some stuff i guess :)

birty / nismoboy - dont pay out melbourne. it is 200% better than Brisbane or qld - apart from the weather. It has the best night life ever.. and way more style.. and good food.. soo nah!

Originally posted by peteSmith

ok nismogirl.. i will go to nimbin for u and get you some stuff i guess :)

birty / nismoboy - dont pay out melbourne. it is 200% better than Brisbane or qld - apart from the weather. It has the best night life ever.. and way more style.. and good food.. soo nah!

i'll give ya that, but.....well you no.....once you have become a QLDer your always a QLDer

Guest Boxhead

petesmith talking here.

bbq is definately on for 1:30 tomorrow!!!!!!!!!!!!!!!!!!!!

please dont cancel ppl and get everyone to come cos the more the merrier. I am sure if we only have a few ppl it will be no where near as fun

my phone (dave) in case u need directions, or to say you will be late etc

0413 144 121, boxcar racers (michael) - 0413 115 376

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...