Jump to content
SAU Community

Recommended Posts

Off a 92 R32 GTSt that has done 145,000 kms

Will be coming off the car in the next 4-6 weeks. Advertising now so buyer can see, hear, inspect both whilst its running on the car and once it has been removed.

30,000 kms ago turbo had minimal shaft play, as it was removed to replace gasket.

For sale as a result of upgrade. Cant speeak for Jap owner prior to me but since 70,000km has never done more then 5,000kms without new filter and Mobil1 oil. Typically ran at stock actuator boost level, however has occassionally (approx 12 times) been ran at 1 bar.

Price - $300 or

- $650 with 3"stainless steel dump & front pipe.

(non turbulence type dump)

Link to comment
https://www.sau.com.au/forums/topic/17974-fs-rb20det-turbo/
Share on other sites

  • 2 weeks later...
  • 1 month later...
  • 3 weeks later...

Its off the car, the shaft has a little movement forward and backwards, maybe 1mm. Is this considered normal.

Leading edge of compressor shows evidence of erosion due to shitty HKS air filter. Hasnt actually damaged the blade or anything, but you can see evidence of small particles having got thru the filter

Have received an offer for $150, anyone else????

Link to comment
https://www.sau.com.au/forums/topic/17974-fs-rb20det-turbo/#findComment-489107
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...