Jump to content
SAU Community

Recommended Posts

hi i own a 1992 non-turbo auto r32 gts25 with the rb25de engine

i figure it has the same automatic gearbox as the turbo r32's (comfirm this??)

im going to swap it over with an r33 turbo manual box.

the thing is, is it a direct bolt on to my engine?

how do you go with the speedo sensor wire connecting up to the r33 box??

and which tailshaft do you use? does it have to be custom made? how much?

thanks guys

p.s - im swapping to the r33 box as im going to turbo it later on and the r33 box should handle it better

Link to comment
https://www.sau.com.au/forums/topic/179795-r32-gts25-rb25de-auto-to-manual/
Share on other sites

Yes it will fit in sweet as bro..

I did a conversion from Staggy 25de into a r32 and box mounted sweet as!

So you should be right..

Really.. dont know much about the speedo/reverse/clutch cbale mounbting shit cos wI dont have my workshop manuals here..

but from my experience.. its all good!..

but really.. you may as well sell the auto and BUY an man. it works out cheaper and HEAPS easier@!

Converted the exact car you talking of, speedo went wonky on me, but other than that it went ahead pretty well, i paid someone to do it, no idea how to fix the speedo as i never ended up doing it, sold the car not long after the conversion so all in all, ive been no help at all hehee

Cheers

G

Converted the exact car you talking of, speedo went wonky on me, but other than that it went ahead pretty well, i paid someone to do it, no idea how to fix the speedo as i never ended up doing it, sold the car not long after the conversion so all in all, ive been no help at all hehee

Cheers

G

thanks guys

so which tailshaft will i need?

and does anyone have any idea about the speedo cable?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...