Jump to content
SAU Community

Recommended Posts

Hi there I bought a 2003 MT6 350GT Sedan on Friday and have been having a problem with the keyfob not unlocking the doors.

The car locks with the keyfob but will not unlock. To get into the car I have to insert the key into the door lock, unlock the doors manualy and then I have to use the keyfob to unarm the alarm before opening the doors.

The alarm is appears to be a factory alarm it has an immobiliser tag which has Nissan on it (see pic)

I saw some advise on 35driver.com which outlines instructions on how to reset the keyfob.I followed these and while I was still inside the keyfob locked AND unlocked while but once I opened the door and got out of the car it no longer worked!!!

Any advise welcome.

post-41028-1186488320_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/179958-help-keyfob-not-unlocking/
Share on other sites

  • 6 months later...

door lock motor has died. also I would make the suggestion that you pull the OE (dealer fitted ) alarm out before it strands you. if the remote keys die you are stuffed.

they are $200USD for the motor and catch assembly. its a major pain to get out. one thing I did note was the G35 used a different system the the V35 in regard to remote entry. the G35 appeared to have a separate remote where the V35 is built into the key.

food for thought.

door lock motor has died. also I would make the suggestion that you pull the OE (dealer fitted ) alarm out before it strands you. if the remote keys die you are stuffed.

they are $200USD for the motor and catch assembly. its a major pain to get out. one thing I did note was the G35 used a different system the the V35 in regard to remote entry. the G35 appeared to have a separate remote where the V35 is built into the key.

food for thought.

Chris (or anyone),

Do you happen to have correct nissan Part #'s for the CPV35 door lock actuators (motors). I have had great service from 'J's export garage' and think i could get them through them if I knew the right part numbers....

Sad/Funny story.....Right now I have a piece of string tied to the lock inside the car which I pull through the boot (remote boot access still works!) to unlock the door! Before you suggest using the key - The Japanese owner for some reason changed the lock assembly for a high security carbonite? lock - (real skinny key) - which I did,nt get with the import! arghhhhhh...

I've heard from Riverside Infiniti (only took a few days). They want $US350 inc shipping to NZ. I am tempted to go with that but I have a nagging doubt that the Infiniti part may be slightly different than the Skyline unit...can anyone reassure me they are the same?

thats better. about what I paid for one side($195USD). same parts differnet badge. both are nissan.

I'm seeing these cars with the G35 badge on them occasionally and more of them with the full swap lately,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...