Jump to content
SAU Community

Recommended Posts

Ok my car is an r32gtst with rb20det 2530 gtr inj bosch090 fuel pump making 305hp atw. Anyways was talking to a fellow drifter about how my car hesitates sometimes, like a fuel pump prob. He suggested I try running 12 volts straight to the pump. Anyone have any experiance with this?

Cheers in advance.

Link to comment
https://www.sau.com.au/forums/topic/180140-12-volts-to-fuel-pump/
Share on other sites

As Manwhore said

Good idea

A lot of aftermarket fuel pumps come with relays, if yours didn't do a search for bosch relay, or make your own

Or you can do the grounded trick off the factory harness, so it runs at 12v all the time, although in my own car I'd use a completely new relay running straight to the battery(which is in my boot anyway)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...