Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

not the one with all the poxy colour schemed yellow crap on it? is that the one ur thinking of shiro?

i do remember some wanker in a blue mondeo with yellow crap on it trying to race me but he got his ass handed to him on a plate with 2 passengers i was dropping off at the casino.

Originally posted by inark

the pic is where i had the needle go the furtherest... which when i cut out the speedo in paint and rotate it so the lines continue works out to be about 220... got a little scarey after that on the rough part of the "track"

i guess my 220 in my 1987 alfa sounds even more impressive that what i already thought it was :(

Originally posted by 5 litre eater

Pushead, sounds like you need a wheel balance something shocking! I'm not trying to be a hero, but in my sil, i can go 180 no worries on stock suspension (in controlled environments of course!!! hahaha)

Take your car to a place like Bob Jane or Beaurepairs and get a wheel balance. Pretty sure stock suspension should be that bad!

yep, no problems will certainly need a wheel balance.. crusin down to the city today at 120km and car was shaking even at that speed.. $10 bucks a wheel rite?

Originally posted by inark

RSR -  just feels like the engine cuts out hard and then it like staggers til it drops down then back up again... like the more u press down on the accelerator the less it goes. Makes a lot of popping noises too

btw this post has the pic as i will remember to attach it this time.

You just damn crazyman inark!... gee's.. how the hell did make it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...