Jump to content
SAU Community

Recommended Posts

your best bet is a hidden kill switch somewhere in the car that only you know about, Ive heard of some very creative ones such as pushing the ashtray in (push button switch behind it), these simple switches are just as effective (if not more) as an immobiliser.

I also have spoken to a few vehicle recovery cops and they have all told me that the best defense against car theives is a club lock... I have been told by numerous cops that the first question they ask the owner when a car is found after being stolen is did it have a Club lock? The answer is ALWAYS no.

i totally agree.... a hidden kill switch which only you know about is the best defense. however, if they want it that badly, they'll just put it on the back of a truck. happened to my uncles X-Trail.

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

i totally agree.... a hidden kill switch which only you know about is the best defense. however, if they want it that badly, they'll just put it on the back of a truck. happened to my uncles X-Trail.

Yea my mates dad's HSV was just pulled onto the back of a tow truck.. never seen again.

Have to agree with the staying away from audiotech, they did my alarm and charged for all these features (microwave sensor to detect anyone inside car, self arming and self-closing windows when armed) that werent installed and the sensor that detects if the bonnet is closed broke the first time i closed it...

I had someone break in and try to nick my car out the front of the legislative assembly, they bent the steering wheel and got the horn stuck on (lucky me!). Took a little while, but a few months down the track and it's starting to become clear that they've bent the steering collumn and stuff. It's not cool. Got an alarm fitted, massive noise makers all over the place. Love it!

When I lived in Canberra a couple of years ago, my 32 was subjected to an attempted theft from the security carpark under the units I lived in, in Kingston.... no security system, but they sheared off the boss kit trying to break the factory steering lock.... and left the $500 Momo wheel in the car.... cost me $300 to fix the Qtr window..

  • 1 month later...

Go to dick smith, grab a switch and some wire.

Make your own.

Very happy with mine. $1.50 switch. and cause of the way i have it hocked up the engine will turn over. Just with no spark. Causing the battery to flaten hopfully before the car is taken.

A carlock is a great thing aswell.

A mate had his car brocken into 2 times in a small period of time(never managed to get the car going). Put on a steering wheel lock and it never happend again.

+it turns into a baseball bat if ever needed.

I am not sure how effective club locks are either. I remember watching one of those sensationalistic news programs and using brute force a thief can break even the best ones.

I do like the idea of a hidden kill switch though. The only way to steal the car besides locating the switch is on the back of a truck...

they aren't very affective at all, but i use one anyway on top of my security system as it just another deterrent to help warn off your average joe who walks by

^Thats right, And remember if a theif see a car with a crock lock and one with out he is going to go for the one thats easier to take, If you have a crocklock and an alarm + a kill switch your increasing the chance that your car will still be in the spot you left it.

A carlock is a great thing aswell.

A mate had his car brocken into 2 times in a small period of time(never managed to get the car going). Put on a steering wheel lock and it never happend again.

+it turns into a baseball bat if ever needed.

haha, my mums old steering wheel lock "the club" actually had a disclaimer/warning against using "the club" as a club

i got broken into 3 times in the last month. funnily enough, my alternator is F**Ked so there attempt in hot wiring failed.. "SORRY GUYS, To whoever the SH*T stains are!!* noww i have to sell my car cos i dont have the time for this!!

Everyone, be careful where you park you line, when smfn happens to it, you will miss it, like i do :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
×
×
  • Create New...