Jump to content
SAU Community

Recommended Posts

Hi guys,

finally had my engine swap work done to my '71 240z,

Have put in an rb20det w/gearbox, cooler, eng. management system, surge tank, fuel pumps

Looking at getting the exhaust done for it in the next few days and am curious on any thoughts in regards to a size.

I'm thinking 2 1/4 - 2 1/2", with a hi-flow cat and effective muffler. I've had a couple of friends tell me to go 3", but i'm not convinced its going to really help the performance of the car, moreso just making it louder than i want.

Have had a search through the forums with not much success, sorry if i'm repeating a gone over thread.

Any advice on this would be greatly appreciated.

Thanks again

Link to comment
https://www.sau.com.au/forums/topic/180588-exhaust-size-query/
Share on other sites

yep :cheers: fully agree

3" is best, a 3" will sound nicer, deeper, it won't be louder if you do it right

Put in 2 mufflers, or a muffler and a resonator, one just after the cat, one at the end of the car

It'll sound very nice

3" will drone like a m$%()#*(er, I'd be going to a good exhaust shop and saying "i want maximum power for minimal drone". 3" is very hard if not impossible to stop droning, it'll give you headaches, did in both cars i've owned with it (and this one is only a catback). imho

3" will drone like a m$%()#*(er, I'd be going to a good exhaust shop and saying "i want maximum power for minimal drone". 3" is very hard if not impossible to stop droning, it'll give you headaches, did in both cars i've owned with it (and this one is only a catback). imho

there is this new invention called mufflers. if you get good ones they will cut the noise and drone. get a good centre muffler and a nice oval muffler on the rear and it should be all good.

Bit off topic, but what brand resonator's do people use? I mean theres plenty of info on mufflers but resonators seem to be lacking on info like cfm flowed and noise reduction. Anyone recommend one?

trying to find a good 3" resonator is hard. most are too skinny through the body. just get a 3" off centre-centre oval muffler put in the middle, then a either a straight through 3" oval muffler on the rear, or a 2nd off centre-centre muffler for the rear.

3" will drone like a m$%()#*(er, I'd be going to a good exhaust shop and saying "i want maximum power for minimal drone". 3" is very hard if not impossible to stop droning, it'll give you headaches, did in both cars i've owned with it (and this one is only a catback). imho

Maybe dont be a tight ass and get a decent exhaust made?

Mine have never "droned" and they were 3" 3 times, and soon a 3.5"

Drone is a resultant from harmonics down the length of the system. Proper resonator / muffler choice should eliminate drone in ANY pipe size.

SMB are really popular in the rotary world, were a 3.5" system, comprising of SMB cat and muffler, bring 400hp turbo setups to legal limits, with no drone.

also the wall thickness and material of the pipe used has a bid effect on the sound and any harmonics (drone). generally mild steel is sold in thicker pipe than stainless and the mild generally sounds a bit nicer with less resonance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...