Jump to content
SAU Community

Recommended Posts

What are you using the car for? track or street? if track my pick would be Motul RBF 600 if your cars a streeter then any dot 4 or super 4 fluid will be fine :) personally id go the motul for that too cause they make quality sh## you will also need two 600ml bottles to flush all your brakes and you might have enough to do you clutch if you wanted to do that to :)

Link to comment
https://www.sau.com.au/forums/topic/181776-brake-fluid/#findComment-3301818
Share on other sites

The best stuff that we've used in both the rally car and road car is the Lucas RBF600. I went away with the Motul because, its not compatible with other grades of brake fluid, so if you use the Motul, you have to keep using it. This might be ok in a road car, but at a rally, when service park is miles from your nearest autobahn, it was a problem if you expectingly had to play with the brakes, and didn't have spare fluid.

The performance is easily as good as either the Motul or Castrol, and so we've stopped stocking the Motul, and now only keep the Lucas. $55 for a 1L bottle puts it pretty much on part with the Motul for price too. Its also fine just for a street car, so we now sell very little Dot 4 or 5.1 now... Its brakes, its a fraction of what a car or brake upgrade costs, so we've talked most people into using it, and all have been appreciative...

Had a little bit of a discussion on it here:

http://www.astinagt.com/forums/showthread.php?t=8264

Cheers,

Greg

Link to comment
https://www.sau.com.au/forums/topic/181776-brake-fluid/#findComment-3303176
Share on other sites

what temperature is the 5.1 stuff usually rated at on average, thats what i have in my car, i took it down to wakefield on the weekend and once i got used to the track i started really using the brakes. after about 3-5 laps, cant remember, my brake pedel started going right to the floor cause i over heated the brake fluid. now im after a higher boiling point fluid so might try that lucas stuff.

just wondering cause i must have heated the fluid up heaps for that to happen with that grade fluid

would love to hear what you guys have to say

Link to comment
https://www.sau.com.au/forums/topic/181776-brake-fluid/#findComment-3303880
Share on other sites

When was the last time you changed your fluid? im pretty sure if my memory serves me correctly the higher the DOT rating the faster the fluid will absorb moisture therefore needing to be flushed more regularly because 5.1 has a higher boiling point then your standard 4 or or super dot 4 i think the dry boiling point for it is around 270C so it might have just been old fluid

Edited by /2on
Link to comment
https://www.sau.com.au/forums/topic/181776-brake-fluid/#findComment-3304348
Share on other sites

I used Nulon "Xtreme" super dot 4. Wet boiling point 184 deg C, Dry boiling point 286 deg C. The specs were nearly identical to Castrol Edge

bled the whole system dry, replaced and bled with one 500ml bottle which was suprising - now I have 2 spare bottles! Have not faded street or track (very cheap too only about $7 a bottle).

Wouldn't bother paying for racing fluid for street use, but feel free if you need something to spend your money on.

Link to comment
https://www.sau.com.au/forums/topic/181776-brake-fluid/#findComment-3306392
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...