Jump to content
SAU Community

Recommended Posts

well with the impending sale of my R32 (yes, watch out for those interested in a worked R32 gtst auto!) i have for sale a few items that are taking up space in my garage. all items have pictures which are at the bottom:

V35 350GT wheels

- stud pattern is 5*114.3 (same an R32/R33/R34)

- fronts: 17*7.5 +30 with 225/50/17

- rears: 17*8 +33 with 235/50/17

- came off my V35 350GT when i bought it

- nissan centre caps

- NO gutter rash, scratches, or anything. they are in absolutely immaculate ondition - see for yourself

- 90% tread nankang tyres, completely roadworthy

price: SOLD

AFM from an rb20det

- this is a working AFM from an rb20

- will work on any rb20 or series 1 rb25

price: SOLD

AAC valve from an rb20det

- this is a working AAC valve from an rb20det

price: $20

Universal automatic shifter

- this was used on my R32 GTSt automatic for about 1-2 years

- GREDDY racing performance

- looks great, makes the interior look a million bucks!

price: SOLD

Universal hand brake handle cover

- silver

- unused

- looks bling ;)

price: $15

standard R32 side idicators + globes

- 2 * standard SIDE indicators off my R32 gtst

- orange with globes

price: SOLD

Justjap catch can

- has a few scratches and the rubber tubing (oil level indicator) has copped a bit of engine bay heat making it discoloured a bit

- silver

- filled with stockings and steel wool

- has removable top and bottom and plug to drain it if you need to

- looks great in any engine bay (i only had it as a bit of bling)

- comes with about 1m of hosing

price: $30

Beltronics laser detector

- Beltronice vector 945 radar detector

- these are >$500 new

- comes with car adaptor - 2 wires to be spliced in +12 and ground

- for more info: http://alatest.co.uk/apps/reviews/533535/-...Laser+Detector/

- note: these are legal to buy / sell in any australian state, and in some australian states are legal to use (please check your respective state yourself)

price: $90 + postage

all items are located in New Farm, Brisbane.

I am willing to ship small items at an extra expense but for large items like the wheels pickup is the only option

images for all items are below

to contact me, send a PM or reply here - i usually check the forums daily.

thanks,

Warren

post-2094-1188188471_thumb.jpg

post-2094-1188188478_thumb.jpg

post-2094-1188188486_thumb.jpg

post-2094-1188188497_thumb.jpg

post-2094-1188188504_thumb.jpg

post-2094-1188188512_thumb.jpg

post-2094-1188188520_thumb.jpg

post-2094-1188188528_thumb.jpg

post-2094-1188188538_thumb.jpg

post-2094-1188188548_thumb.jpg

post-2094-1188188559_thumb.jpg

post-2094-1188188568_thumb.jpg

post-2094-1188188576_thumb.jpg

post-2094-1188188584_thumb.jpg

post-2094-1188188593_thumb.jpg

post-2094-1188188602_thumb.jpg

post-2094-1188188611_thumb.jpg

post-2094-1188188620_thumb.jpg

post-2094-1188188629_thumb.jpg

post-2094-1188188637_thumb.jpg

post-2094-1188188730_thumb.jpg

post-2094-1188188905_thumb.jpg

Edited by WazR32GTSt
Link to comment
https://www.sau.com.au/forums/topic/182464-fs-r32-r33-v35-and-universal-parts/
Share on other sites

Hey Waz will that handbrake cover fit an R33

its a universal cover so yes

i never fitted it so its brand new

you need to remove your old cover and then this slides over the top of the core of the handbrake.

let me know if you're interested

cheers,

Warren

EDIT:

for some stupid reason i cannot find the beltronics car charger and maual, they are put together somewhere! argh!

i will have to hold off on the sale of it until i can find them

Warren

EDIT#2:

ok so i found the connector. it doesn't run off a battery it runs off the +12V source continuously, and it had been previously connected by being spliced into 12V from behind the dash

as a result, it doesn't have a cigarette lighter adaptor, rather a "+12V" and a "ground" wire which needs to be connected

also i can't find the maual

as a result of this, i've dropped the price of the beltronic unit to $90 plus postage

this is an absolute bargain for whoever gets in first..

cheers,

Warren

Edited by WazR32GTSt
wow that is cheap :)

seeing as i'll never use it and i would rather someone actually get to make some use of it i will let you have it for $20 but that's a once off special for you only.. :laugh:

haha looks like the exact same one i have.. prob with mine is its leaking. is urs leaking..?

i didn't have any leaks. when i sealed it up i used thread tape on the nut and inlet/outlet, and it came with rubber seals for the top/bottom. i put a bit of water into it and inverted it a few times - never had any leaks



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...