Jump to content
SAU Community

Recommended Posts

have a set of hollow 19inch axis rims imported from japan, 90% tread left on all 4. paid $3400 from japan. open to offers! over $1800

untitledai6.png

Axis Reverb - Five spokes and a polished lip hold a lightweight surprise on the Axis Reverb - hollow spoke technology. The Reverb uses a unique casting process that makes each spoke hollow resulting in a lightweight yet very strong wheel. The Reverb comes in sizes for many of today's popular compact front wheel drive cars from 17 and 18 inches, and in staggered sizing for Nissan 350Z, Infiniti G35 Coupe, Lexus SC and GS, Mazda RX7 and RX8 and Toyota Supra. Fitments for cars with factory Brembo brakes like the STi, G35 and 350Z assure a perfect fit over large brakes. Suitable for track use, the Axis 350Z race car uses Reverbs in an 18x9.5 front and 18x10.5 staggered fitment.

Read how Edmunds.com built a Cobra Killer of a Mustang GT and used a set of Reverbs for their light weight and high strength.

Edited by r33gtst-ser2

mate when i look at the picture, and the rims on my car, they look exac the same. but not 100% all i know is they cost me $3500 when i got it from the car dealer, and he got them from japan. tnx mate

ok guys i have found the right ones---- not sure if there 19x8.5, 19x9.5, 19x10.5. the backs are alot wider than the fronts

untitledtpd2.png

untitlednd4.png

Axis Hiro - Five spokes slightly narrow on the way to a deep polished lip, then bend back over the lip for an even deeper stance. The Hiro has perfect staggered fitments for Nissan 350Z, Infiniti G35, Toyota Supra, Mustang, Lexus GS, Lexus SC and even certain Volkswagens and more of today's modern sedans and coupes in 19x8.5, 19x9.5 and a huge 19x10.5. The Hiro boasts generous caliper clearance and will even fit over factory Brembo brakes and many aftermarket kits as well. The Hiro is very popular as a staggered wheel, but also has perfect fitments for non-staggered wheel fitments like Acura TL, TSX, Honda Accord, Mitsubishi Evo VIII and IX, Nissan Maxima, Scion tC, Subaru WRX and STi. Now available in 18 inch applications in non-staggered sizes.

well let me know...

also can you please tell me the offset and width... if they are genuine axis they will be in the inner of the rim

Do you have any pics of the wheels on the car??

What brand tyres?

Yes, i am interested but want to know the width and offset. The details in the description don't help. They just give the "possible" size.

Thanks

Bolt Patterns guys i might swap for after market parts for my 33 gtst. im after---dump from turbo to cat---turbo---power fc---ect. let me know what u got. tnx

5x100, 5x114

5x114

thats all the info there is, sorry guys

this is not my car its just a pic of the rims. not sure what size!!

grrrrkm8.png

Edited by r33gtst-ser2
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...