Jump to content
SAU Community

Forget Hi-flow - Diy Mod Your Turbo!

Oosh

By Oosh,
in South Australia

 Share

Recommended Posts

pkblade Experienced

pkblade

Posted
Posted

lol, surely he's kidding :unsure:

Followed the link..

Dude seems fairly serious. :S

That HAS to be THE most dodgiest mod of all lol.

That mod is no good if he also doesn't follow it up with a DIY sand porting of the head/manifold & bore out block to get more flow. A careful mix of 2/3 water & 1/3 sand poured through the intake & oil filler does wonders. Need to do the process twice though, first using <200-grit sand with low revs & then >200-grit while redlining it to smooth things out. :D:blink:. Using cement mix is okay but can be too coarse & what ever you do don't use the quick-drying kind.
Pauly33GTS-t Veteran

Pauly33GTS-t

Posted
Posted

See madaz, deluxe/dan/insert pauly hater here, cant help themselves...

no deluxe you git. of course I wouldnt do that, only the best for my car wherever I can help it.

Even if I did do it, I would have kept it a secret... this bloke meh... thinks hes starting some sort of revolution.

Madaz Grand Master

Madaz

Posted
Posted
:(:)

I surprised that it didn't shit itself the first time it boost.

Very very dodgy, but hey if you have an mx-6 you might as well mess around with it, it will blow up sooner or later.

my mates Mx6 is making 154FWKW and 550Nm

See madaz, deluxe/dan/insert pauly hater here, cant help themselves...

no deluxe you git. of course I wouldnt do that, only the best for my car wherever I can help it.

Even if I did do it, I would have kept it a secret... this bloke meh... thinks hes starting some sort of revolution.

aye i aint no Pauly hater i will however pull you up if you say silly thing or start acting the goose

Oosh Veteran

Oosh

Posted
  • Author
Posted (edited)
can someone confirm they are actually industrial welds? It looks like he has just used a butane soldering iron and stuck some solder on the edges of the fins.
Probably just a shitty arc job with almost zero penetration.
my mates Mx6 is making 154FWKW and 550Nm
550Nm, maybe in 1st gear, those numbers don't match unless he transplanted a tractor engine in there. Edited by Oosh
Madaz Grand Master

Madaz

Posted
Posted
Probably just a shitty arc job with almost zero penetration.

550Nm, maybe in 1st gear, those numbers don't match unless he transplanted a tractor engine in there.

ill get his dyno chart around the ECU has been modified got walbro 255lt fuel fump and was running 22psi ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • Milkmun
      R33 suspension bushes replacement, what wears the most?

      By Milkmun · Posted

      As above, replace as many as you can afford. If anything, due to old age.
    • Dose Pipe Sutututu
      Oil Control In Rb's For Circuit Drag Or Drift

      By Dose Pipe Sutututu · Posted

      Can confirm previous shop that built my motor had no fking clue about oil control and caused my motor to shit itself after two track days. Current shop, Birrong Automotive, has managed to build me a motor, not to mention, has also let me tune it myself and it has yet to blow up after 7 track days. Great oiling success, yashimash.
    • MBS206
      Oil Control In Rb's For Circuit Drag Or Drift

      By MBS206 · Posted

      It definitely seems like you have no beef, with only digging up a 5 year old post, to comment on an inflammatory item with total insensitivity, and of which had nothing to do with the thread.  Yep, you definitely seem like a great person and your friends and family would be so proud to know of your lovely actions
    • Shizu
      Returning after a long time!

      By Shizu · Posted

      Thanks buddy, so happy to be back! Managed to pickup a Unicorn R34 completely stock and clean. Looking forward to adding some goodies to it and posting one here. I'm shocked that so many forums stopped. If you could find my old profile - I'd love that if its possible. My old account was JET200GT. My email might need to be fixed too. To use this one. I think it was the same though..
×
×
  • Create New...