Jump to content
SAU Community

Recommended Posts

ok im moving house soon and dont wana have to take all the contents of my garage with me so im cleaning up the contents.

i have:

-1x12" pioneer subwoffer

-1xcomplete electrical front lip for 33 4door including motors

-1xstock side mount intercooler for a 33

-1xnew front mount intercooler for a 32,33,34 never been fitted

-1xcannon exhaust never been fitted

-various amounts of 2 1/2" mild steel exhaust piping with 45'+90' bends and straight runs.

pics and info:

1. 12" Pioneer TS-W306C

1000w max / 400 nom.

83oz duel mass magnet

looking for around $100, had it in my car for a while but went for 2 12"s and paid less than i paid for this one.

2. Dunno what the front lip is worth really, or the motors, all running gear will take $50

3. Take $50 also for the smic but hurry cos my brother in law wants it for his mazda 3 turbo project lol

4. new fmic comes in a kit that retails over $600, its a monza cooler(600x300x76) and has never been fitted take $200

5. Sal wants the cannon on her car so ill only take $100 paid $50 more than that.

6. Exhaust pipes would be handy if u were doing a cat back system cos i have enough piping to do the whole job in 2 1/2" mild steel.

would use it for sals exhaust and do it straight thru but its too big for a 4 cyclinder.

if u need details reply to post or if ur keen on an item pm me

obviously id prefer pick up on all items, if u want it another way u can sort it out.

im happy to add $10 for fuel and deliver it to ur house in brissie or on the coast or would be happier to meet

at an agreed location.

any other queries call 0432035873, if i dont ans send a message cos ill prob be at work and ill get back to u.

Darren

ALSO WANT TO SAY I AM LOOKING FOR A SET OF COILOVERS OR LOWERED SUSPENSION KIT (PREF NEWISH)

POST UP UR PRICE, OR ITEM/S TO SWAP FOR IT.

post-34246-1193731460_thumb.jpg

post-34246-1193731467_thumb.jpg

post-34246-1193731474_thumb.jpg

post-34246-1193731480_thumb.jpg

post-34246-1193731486_thumb.jpg

post-34246-1193731497_thumb.jpg

post-34246-1193731503_thumb.jpg

post-34246-1193731514_thumb.jpg

post-34246-1193731523_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/182991-garage-sale-stockaftermarket-gear/
Share on other sites

  • 2 months later...

its from a series one, its stock and basically in the dash there are buttons that lower it down and raise it up so on the highway u can lower it down and goin slow over bumps u can raise it, its for more downforce apparently, its automatic too i think, like the doors wen u go ova 20ks the doors lock, if u go over a cirtain speed this thing drops down, basically this will suit someone with one on it already but the motors are shot or the bar is cracked or sumthing, too much wiring otherwise, stock the motors just click into the harness coming off the headlight harness.

got all the bolts and brackets too btw.

does the fmic come with the piping to install it?

no, the exhaust pipe im selling was the piping i had used on my old cooler and i did it the easy wat thru the existing holes but it was pissing me off so i decided to get a proper piping kit but i couldnt buy pipes on ther own so i bought a kit with intercooler included and thats y its for sale i didnt need it just the pipes that came with it.

pm replied too.

  • 4 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...