Jump to content
SAU Community

Recommended Posts

mine flutters, not a quick reversion flutter, a spaced out one. and if i look up the end of it and pull in the accelerator cable to to the turbo spooling the bov still opens, and thats only on like 1 psi. i though that it wasn't opening properly at first but it is. its got something to do with the dual action its got. if you quickly close the throttle it just dumps it fast but if your working the pedal and slowly letting it off it will flutter.

Edited by QWK32
mine flutters. and if i look up the end of it and pull in the accelerator cable to to the turbo spooling the bov still opens, and thats only on like 1 psi. i though that it wasn't opening properly at first but it is. its got something to do with the dual action its got. if you quickly close the throttle it just dumps it fast but if your working the pedal and slowly letting it off it will flutter.

ohhh! learn something new everyday ;) i stand corrected :)

mine flutters, not a quick reversion flutter, a spaced out one. and if i look up the end of it and pull in the accelerator cable to to the turbo spooling the bov still opens, and thats only on like 1 psi. i though that it wasn't opening properly at first but it is. its got something to do with the dual action its got. if you quickly close the throttle it just dumps it fast but if your working the pedal and slowly letting it off it will flutter.

yeah got the apexi bov, fast flutters at low rpm changes but once ive built a nice amount of boost, its just full vent pssshhh >.<, if only it wouldnt stall, like one time it stalled at the p plater in the car next to me said to his mates, look he stalled it, i didnt want to go into how skylines and afm and bov = stalling probs :S

guys how do you guys burn your tyres like that? without take off the road. as he is burning his tyre in position without move..

how can you do that? with manual!

thanks

LOL he is pushed up against an invisible wall man it's all magic tricks..

guys how do you guys burn your tyres like that? without take off the road. as he is burning his tyre in position without move..

how can you do that? with manual!

thanks

heel and toe, clutch to 2nd gear, release clutch, change left foot from clutch to brake; presto!

heel and toe, clutch to 2nd gear, release clutch, change left foot from clutch to brake; presto!

AKA Line-Lockie, my brother used to do them in his VN V8 in our driveway.

Thats a sic vid, what's on the road at the end?

OT Get an aftermarket plumb-back.

Edited by 90GT4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...