Jump to content
SAU Community

Test You Internet Speed

Pal

By Pal,
in WA Wasteland

 Share

Recommended Posts

  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Ehgriez Mentor

Ehgriez

Posted
Posted

Ive tested schools due to a friend that works for the EDU dep. They are getting much faster speeds than your average residential house as you would presuem.

"Telstra Bigpond 8mb ADSL2"

Thats ADSL1.

ADSL2+ is rated to 24mbps, you may experience 8MB but if thats what your net is rated at then its ADSL1.

Telstra lumps its High speed ADSL1 and ADSL2+ plans into "High Speed" so unless you talk to the activations department, you probably didnt choose.

Topaz Grand Master

Topaz

Posted
Posted (edited)
I'm on Westnet 1.5MB.

631961889.png

I was on that until 2 months ago-ish

Changed to AAPT because they offer unlimited downloads between 8pm-8am on the 8Mbps plan.

For us WA geezers it's 5pm-5am

:P Fkn Grouse!

Edited by Topaz
syfon Veteran

syfon

Posted
Posted

It wont let me try it from work, however when i download at home via bitsoup.org using utorrent, i usually sit on around 800k/b per second, so i'll download a 750mb movie is basically 10mins :blink:

  • 5 months later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...