Jump to content
SAU Community

Recommended Posts

+1 what Chops said - it actually was not so much BJs fault at all .... BUT he should either spend a shitload of money on the track, digital signboards, infrastructure, etc etc, or sell it to someone like Bill who actually wants to pour money into it and bring Adelaide back to the once mighty drag town it was.

When i was in melbourne a few months ago i was speaking to my friend about Calder Park. He said that Bob is planning a major overhaul of both Calder and AIR.

He only knew a small amount about the AIR renovations, It will be getting digital signboards (ex calder displays), resurfacing of the whole track and some facility upgrades aswell.

He has put a huge amount of money aside for both tracks, however i feel Calder will get the majority of the money knowing the plans they have for the Melbourne facilities.

and the feeling i got from my friend (who is close to Bob) is that BJ wants to get the 2 tracks up and running to their full potential as both open track days and state level motorsports. At the moment Calder is open at least 1 day a week for free practice and bob wants to bring this sort of public access to AIR.

I will dig for some more info and let you know what i hear.

When i was in melbourne a few months ago i was speaking to my friend about Calder Park. He said that Bob is planning a major overhaul of both Calder and AIR.

He only knew a small amount about the AIR renovations, It will be getting digital signboards (ex calder displays), resurfacing of the whole track and some facility upgrades aswell.

He has put a huge amount of money aside for both tracks, however i feel Calder will get the majority of the money knowing the plans they have for the Melbourne facilities.

and the feeling i got from my friend (who is close to Bob) is that BJ wants to get the 2 tracks up and running to their full potential as both open track days and state level motorsports. At the moment Calder is open at least 1 day a week for free practice and bob wants to bring this sort of public access to AIR.

I will dig for some more info and let you know what i hear.

As Miss34 said, words are cheap.

I heard all this stuff 2 years ago.

  • 4 weeks later...

Bob is definitely keen on getting his tracks back up to national standards. The work on Calder is 30 - 50% done now with new race control facilities, resurfacing, new timing boards (old one heading over this way).

Work on AIR should be starting soon after work is finished on Calder. So it will still be a while off as there is strong talk of extending the track over there.

will keep on looking further to try and find the exact plans around Air - resurfacing the whole track & drag strip is in the mix at the moment

Interesting yes, but still the EXACT same story I heard in 2005. Let's hope they mean it this time.

I'd almost rather they came out and said "we're doing nothing, it will never open again" than the chinese whispers.

Edited by chops

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...