Jump to content
SAU Community

Recommended Posts

Hi All

I have an RB25 plenum chamber 4 sale, I bought it off ebay for $350 + postage.

Reason 4 selling is that i have an Rb20 and was told it would work, when i went to fit it i found out that i need RB25 injectors and fuel rail. Seeing how i just spent a grand on injectors i chose to leave it the way it is and save up 4 a custom plenum.

$250 firm

Also 4 sale is a 93' R32 power steering pump. Was working great, reason 4 selling is that i upgraded 2 a Rb25 one, because I no longer have an off the lines 4 the rear steering.

$60 ono just jap sell them 4 $130

Also i have a stock rb20 intercooler. plus most of the piping. A R32 parcel shelf and a stock airbox. Not 4 sale will give away, just wasnt sure if there was someone out there that needed one and i didnt want to just throw them away.

I live in the southern highlands but for that little extra I am willing 2 drive to sydney as long as money is guaranteed

Thank you, either email me at [email protected] or PM on here.

post-35315-1189224882_thumb.jpg

Edited by PetieR32
Link to comment
https://www.sau.com.au/forums/topic/183854-rb-stuff-4-sale/
Share on other sites

Hey all

sorry tried to put a pic up but couldnt get it to work, its a trust or greddy copy, cant remember which one.! everyone says different lol. GTR style. can email a pic if wanted.

Thanks

Edited by PetieR32
Link to comment
https://www.sau.com.au/forums/topic/183854-rb-stuff-4-sale/#findComment-3332243
Share on other sites

Hey mate,

Is this a front style like this

http://www.thor-racing.co.uk/images/rb25_plenum_mod.jpg

of is the the standard rb25 where u have 6 cyl and the throttle body is in the middle of 3 and 4 cyl?

Please let me know 0401651346, i will get it off you if its as per pic

Hey all

sorry tried to put a pic up but couldnt get it to work, its a trust or greddy copy, cant remember which one.! everyone says different lol. GTR style. can email a pic i wanted.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/183854-rb-stuff-4-sale/#findComment-3333296
Share on other sites

Hey mate

nope its just the plenum. i think u just use all the stuff of a standard one. Dont hold me to it but. sorry

stole this from a site that sells them,

Intake manifold

High Flow, High Performance, Race Intake Manifold

Made of cast aluminum

Super High Flow , Large Runner, Large Plenum Performance Intake Manifold

IMPROVES HIGH END POWER Especially at high RPM!!!

Especially with performance cams and Big Bore Throttle Body!!!

Pre-bored to accept Large Throttlle Bodies

Link to comment
https://www.sau.com.au/forums/topic/183854-rb-stuff-4-sale/#findComment-3344525
Share on other sites

You need a q45 throttle body, or an adapter plate which sells for $120.

How does the casting look between the water gallery and the ports, these manifolds are a bit hit and miss, some are thin, others seen to be ok, but they all need to be milled on the head surface, as the casting is too rough to seal properly.

Link to comment
https://www.sau.com.au/forums/topic/183854-rb-stuff-4-sale/#findComment-3344887
Share on other sites

Oh yeah forgot about the tb, but bigger tb is always better he he, not sure about the water thingy, i'll have a look and get back to you.

But thats y its going for $350 or something

Thanks

Link to comment
https://www.sau.com.au/forums/topic/183854-rb-stuff-4-sale/#findComment-3349576
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...